Chinese Government Assists Dominica with 2,500 Solar Street Light with Battery and Panel

The Minister of Public Works of the Dominican Republic, Blackmer, said that the Dominican solar street light with battery and panel project, which was assisted by the Chinese government, was being implemented smoothly.The solar street light with battery and panel project has a construction period of 33 months and a total investment of US $ 34 million. It is planned to install 4,851 solar street light with battery and panel on major roads nationwide, of which 2,500 solar street light with battery and panel will be provided by China.


What is the cheapest LED panel light?

I am certain that by the cheapest you mean LED lights that are super affordable and insanely inexpensive. Frankly, I think LED lights must be chosen on the basis of features and qualities like longer lifespan, eco-friendliness, energy-efficiency etc. Pricing comes later on. To buy such LED lights, you don't have to go through the tiring process of searching quality panel lights on online marketplaces like Amazon, eBay & Alibaba (it's really hard to find quality LED products on Amazon & eBay, these days), you just need to find a trusted LED lighting manufacturer & supplier.

Talk about the cheap LED products, since they are made keeping cost-cutting in mind and do not run for long, you should refrain buying them in the first place. I was also going to make the same mistake while searching for LED panel lights for my commercial warehouse located at Denver, Colorado but then a friend showed me the right direction and suggested me to buy top-quality yet inexpensiveLED panel lightsfrom SeniorLED. The brand is a pioneer in the commercial LED lighting space.

They develop & supply high-performing and best-in-class commercial LED lights to business units, corporations, and commercial warehouses across the globe.I placed a bulk order of 150 LED panel lights for my warehouse and got a huge discount on that. The product quality and features are amazing.

The best thing I found in SeniorLED's LED panel lights is that they light up the big space in a go and do not flicker a bit. I am completely satisfied with the product quality and the price they come with.Below are the features that I liked the most about the company and its products:All products come with AIG Liability InsuranceThe company is highly innovation-driven and constantly focuses on developing healthy lighting and modern LED lighting productsTheir LED lighting products come with international safety and quality certificationsThe brand has a global network of LED lighting distributorsReplacement for damaged goods without the necessity of sending back damaged goods.

(I like this one more)The brand is an established name with over a decade of experience in the lighting industry.Super affordable pricing of LED productsLooking for water-resistant LED panel lights? Then, don't forget to check out this latest news based onadvanced waterproof LED panel lights.Here's another Quora answer written by a customer that praises the brand's LED lighting features and after-sales supportThank you!.

sin datos
Artículos recomendados
Heat is the enemy of LED bulbs. Although LED lamps may have a similar shape to incandescent or fluorescent lamps, the LED chips inside the lamp are not so different from the chips in your laptop or other electronics.For this reason, they cannot be used in microwaves or ovens, and some of the larger LED lights can use a passive radiator or internal fan to prevent overheating of the electronics. Enclosed luminaires that do not provide adequate ventilation can dramatically affect the temperature of the LED lamp, resulting in overheating and shortening the lamp life. This is why some bulbs should not be used in a closed ceiling fan or a fully enclosed street lamp.We would like to consider some frequently asked questions about indoor luminaires and indoor luminaire lamps to help you get the most out of your light bulbs.What is an indoor lamp?A closed fixture is any fixture or application where the bulb is enclosed in such a way as to prevent proper air flow or ventilation. This includes, but is not limited to, street lights, where the bottom is glass or plastic instead of open-air, indoor lights and recessed lights with a lens.For LEDs, one of the main disadvantages is the strong dependence of the lifetime on the temperature on the crystal. With increasing temperature, rapid degradation begins the luminous flux decreases and the period during which the luminous flux remains acceptable. A good heat sink to the housing of the LED lamp is a guarantee of its long-term operation. In this regard, we can say that LED lamps cannot provide such a heat sink, and the radiators used in them will be effective only in open fixtures with good convection. In closed luminaires, such lamps will have a very limited service life. A specially designed LED lamp should provide the most efficient heat dissipation from the LED crystal to the lamp housing. If we compare two LED lamps of the same power, the longer will be the life of the one whose body is more heated.How to find out if a light bulb is designed for use in closed luminaires?Here you should look at the specifications for each LED lamp. They can be written on the box or on the instructions inside. If the value for “Enclosed Fixture Rated” is indicated as “yes”, this means that the bulb can be used in indoor luminaires. If “no”, the lamp should not be used in closed luminaires. Using the LED light in a closed lamp when it is not designed for this can cause the lamp to overheat, which can damage the lamp and the lamp. Even a small amount of heat can shorten the life of the lamp and prevent you from enjoying the full value of your investment.Can a lamp for an indoor luminaire be used in outdoor luminaires?Yes, just because the light bulb is designed for closed luminaires, this does not mean that only such a luminaire is required. To use the lamp in a closed fixture, it must be designed to handle the heat of the enclosed space. Outdoors, this is not a concern. Another reason for buying indoor luminaires with bulbs is to use them outside. You may have garden lights or fully enclosed street lights that require a closed light bulb. Since the bulbs are completely protected from rain and other elements, the lamp should not be designed for damp or damp places that must be used in outdoor enclosed can use more type of led lights in indoor lighting, for example, led strip light, slim panel lights, ceiling light, downlight and spotlight,·RELATED QUESTIONWhich LED panel lights are better, round or square?Its is very good question. Based on my experience in my house recently, I would say go for round LED panel lights. Having said that, as far as the performace and luminosity is concerned there is no difference between both the shapes.The reason I said go for round is, because whenever or wherever you install the square LED panel lights, you have to be absolutely spot on while making a cutout to keep them aligned/parallel with the parallel walls of the space/rooms/ceiling edges. With the round LED Panel lights, if you have more than one panel lights to be installed, all you have to do is make sure they are in a straight line, but you need not worry too much about the alignment with the walls/space/ceiling edges.According to be me, asthetically the round LED panel lights look better than the square. It gives a nice conical downlight effect which forms kind of a circle on the floor/area. Well all I have said here is subjective and someone else may not agree with my views.As for the light color, it is better to go for 4000K Day light which gives a nice combination of both Cool & Warm Light, instead of 6000K Cool White or 3000K Warm White.
How to Repair a LED Panel Light
Old and inefficient Incandescent lamps were replaced by Newer CFLs. Then CFLs gave way to LED lamps.Today we see LED panel lights in every nook & cranny of our ceilings. Be it commercial or residential. These LED panels are usually long lived. However, They do fail at times. I am surprised there is no instructable to repair a LED panel light at home. So here we go.1. Busted LED panel light2. Multimeter3. Soldering Iron set4. Tool kit- Including Pliers, Screw drivers, Wire strippers5. Insulating tape6. Half an hour of time.An LED panel is made in 2 components.1. Driver circuitry2. LED chip board (MCPCB)To check the LED Driver, simply connect your Multimeter on 200v DC settting and measure output of the driver. A healthy driver often outputs anywhere from 12 to 60V . This depends on how big your panel is. I got satisfactory Output, so it was time to move to the LED chip board.Now the way these LED chips are laid out are usually very simple. All the LEDs have forward voltage of about 3.2V and are connected in Series. Chip boad failures means its just one or two LEDs have failed, causing entire board to not glow. To test the Failed chip, You simply plug in your LED panel and short each individual LED chip. Shorting a Failed LED chip will cause board to start glowing sans the faulty chip.Other Safer method is to use a small 3v Power source (Like 2x AA batteries) and hook up Thin probles to the output. You can then test each LED using the 3v power.Highlight any Dead LED chips. I have used a red Marker for the same.Here you can try to replace the Faulty chips. But that needs very precise soldering skills along with a reflow station. You can also simply short the said chips and it will fix your rest of panel.I used needle nose pliers to rip apart the faulty chip, then I simply bridged the tracks with a blob of solder. Check the pics for more understanding. You can now verify the Functioning of LED panel once again after plugging it in. If all faulty chips have been shorted out, rest of the panel should glow right up. Usually shorting 23 chips over the entire count of LED chips will have no detrimental effect. Because the LED panel is wired in series, it will keep the current same across all chips. Your Panel wattage will decrease slightly.Refit the panel in reverse order of Installation.Enjoy your newly repaired LED panel light!
Kitty Is Being Stubborn!?
** FIRST OF ALL: Please DO NOT rake your cats paws over the scratching post!! This will REALLY turn them off to using the post and make the problem worse. You can squirt her with a little water from a spray bottle when she even gets near the area you do not want her to scratch.The water spray bottle is very effective, does NOT hurt them and my cats know I mean "NO" when I just reach for the bottle--I do not even have to pick it up anymore. Cats have scent glands in their paws and when they scratch a surface, they are marking their territory. The scratching also removes the outer cuticle of the nail that dries out and needs to be removed. This also explains why my declawed male cat (NO, I did not declaw him--he came that way!) also uses a scratching post for claws that no longer exist--he's marking his turf. I thought he was just being silly. Your cat is doing "horizontal" scratching as opposed to "vertical" scratching and apparently there is a difference in the reason for both types. indoor cats prefer one position while outdoor cats like the other. My talented kitty can do BOTH because she was an outdoor cat that I brought inside! She is a "multi-tasker".She would scratch furniture and almost anything else I did not want her to scratch until I put an unfinished wooden shelf that I would bought from the "cheap bin" at IKEA for about 50 cents. I had it in mind for a cheap shelf to put up somewhere but Miss Kitty decided she liked to scratch it instead, so I have it propped up against a chair and she loves it! Now that is HER shelf/post and she does not go after the sofa or floor carpet anymore...usually. The site I mentioned is very helpful and answered some questions I had about feline behavior. I suggest anyone interested in cats read it. Hope this helps! Please hug your kitty for me.1. What to do with my crazy cat?Awe, I am sorry to hear that :(. But maybe there is some help for her. The main reason kitties do things like peeing on the bed, furniture, etc. when they are otherwise litterbox trained is because they have a stressor in thier lives. This could be anything, from a new pet to a simple change in your schedule. Believe it or not, cats are very in sync with your life and once you change something, they are reluctant to change with you. As far as the litter pan, i have found that Arm & Hammer makes incredible kitty litter. Another thought would be buying a new litter pan. If the one that you have is more than 6 months-1 year old, i would suggest getting a new one. Even if you clean it out, there is still the scent that the ammonia in the cat pee leaves behind. And as for her behavior towards your children, always remember, as i am sure you already know, to put your babies first. If she acts out to them in a way to hurt them, that is where you may have to find her a new home. However, she is probably just a grouchy kitty and likes to be left alone. I know that this is a very stressful situation to be in, but hopefully you and your kitty will be doing better soon! Take care, and good luck!.2. I need to find a furniture store that sells teenage bedrooms set that fits in an attic that has a slope.?yeah we had a bedroom like that and made out own, built in furniture - it was fun3. Is a lamp a piece of furniture?It's an accessory4. How do I get melted Junior Mints on my car seat cleaned?Stop by the office of your favorite carpet.upholstery cleaner and have them treat the candy and then rinse and extract it rom the fabric. I have a carpet cleaning business, we are always doing services like that. Sometimes a car cleaning issue is addressed when we are at the home to clean the carpets or furniture5. I have bad credit... Where and how can I get a loan? (Limit:$5,000?)?instead of taking out a loan to cover your debts and to buy new furniture and take on more debt, try taking a second job instead. You can use that money to pay down your current debts starting from the smallest to largest debt. Then save up money and pay cash for furniture - even if you have to buy one piece at a time. You wo not need credit if you can pay cash. Check out what Dave Ramsey says about getting out of debt and building personal wealth
How to Bring More Outside Light into a House
Dark rooms can make your home feel small and dreary, and letting some natural light in is a great way to open up the space. The easiest way to bring more outside light into your house is to clean and open up your windows so they are letting in as much light as possible. However, even if you do not have a ton of bright windows in your home, there are still things you can do to make it sunnier, like painting your walls a lighter color and using reflective decor. For particularly dark rooms, you can also use LED lights and special fixtures that replicate natural lighting.1. Neon or LED lights under a car in canada legal?Under Car Led Lights2. if only led lights, nation wide were used, what reduction in electricity is there?What nation? The US? Well, the Department of Energy puts it in the 300 terawatt range, though they do not say 100% or cover a mix of LED and Fluorescent.3. Are these 3 switches wired correctly?The switches appear to be wired correctly. The switch on the right appears to be an LED-compatible, triac dimmer. But you have one triac-dimmer switch for LED lights (on the right), and another switch that controls the fan plus another LED bulb? This bulb is the problem. .. or this fixture cannot be used with that particular model of LED bulb.Generally, LED dimmers are not the same as fan dimmers. You can not dim many models of LED lights with a fan dimmer unless you had LED bulb(s) that are specifically compatible with traditional or fan dimmers (now technically, fan dimmers are actually a little different than traditional dimmers, but for your issue that should not really matter). I think you need to find an LED bulb that says it is compatable with traditional dimmers for the one socket being operated by the fan switch4. how do i wire led lights in my car? i have an extra set from a 2006scion tc for my car, a mazda 626(1999).?On a car the ground is the body of the vehcile. Other than that, what kind of l.e.d.'s are they...what are they for? interior, outside, decorative?5. How to power a circuit of LEDs with maximum 5vThe company, Evans Designs, makes LED lights for electric trains. They are not all that expensive, either, and come with necessary circuitry.To a first approximation, common $5:textrmmm$ LEDs should be operated with a constant current and not a constant voltage. Clearly, you know that. But given the wider dynamic range of your source voltage, a special circuit to provide a constant current would help.If you want to try doing this with just one (or two) BJT(s), you could attempt either of the following two choices at very low cost.simulate this circuit - Schematic created using CircuitLabCurrent for the LED in the left-hand side circuit comes through $R_2$, with $Q_1$ diverting (it's a shunt regulator) any extra current through its collector. $R_2=fracV_BE_1I_led$. (You can assume that $V_BE_1approx 760-800:textrmmV$ for a small signal device.) And $R_1=fracV_min-V_led-V_BE_11.5cdot I_led$, where $V_min$ is your minimum DC operating voltage and $V_led$ is, of course, your LED's operating voltage. The serious problem for this circuit is that $R_1$ will dissipate terrible amounts of power when operating at the higher voltages. Perhaps a watt, or more, as it has to drop all that extra voltage.The right hand circuit attempts to deal with that problem. In this case, $Q_3$ will be dissipating the excess power at higher voltages. But since the current is fixed (roughly) across the input voltage ranges, the power is not terrible. Perhaps $200:textrmmW$ when talking about $I_led=20:textrmmA$. But keep in mind that this goes linearly upwards with increasing LED current and linearly downward when talking about less LED current. So just be aware of that.In this right-hand circuit, $Q_3$ wo not be operated in saturation. With $V_BE_2approx 680:textrmmV$ and $V_ledle 3. 2:textrmV$, $V_CE_3$ should be enough to stay out of saturation. However, if the LED voltage is more, then it's possible that $Q_3$ might go a little into saturation. So I would recommend assuming $beta_3approx 50$ for purposes of setting $R_4$. So, $R_4=beta_3cdotfracV_min-V_BE_2-V_BE_3I_led$ to supply needed base current for $Q_3$ (plus a little, given that $beta_3$ is taken as a relatively low value.) Without $Q_2$ and $R_3$ present, there would be no current control. But with $R_3=fracV_BE_2I_led$, the voltage developed across $R_3$ will begin to turn on $Q_2$, which will shunt (sink) base current away from $Q_3$ when the LED current rises more than desired. The result of all this on the right-hand circuit is that there is not so much of a waste of power. It's better, in short, than the left-hand circuit when considering dissipation. But it costs you some complexity. Still, it's small and easy enough that you can pack it into heat-shrink tubing and be done with it. It should work fine. My recommendation, of course, is the right-hand circuit. Even with higher desired LED currents, you can probably get away with a small signal BJT. But I would recommend testing that idea, too. It's a maybe and not a for-sure. One thing I worry about here is that there is no temperature compensation at all and if $Q_3$ heats up a lot and passes that heat along to $Q_2$, then base-emitter junction voltage of $Q_2$ drops significantly and this will reduce the LED current. But I think it may be fine for $20:textrmmA$ and may be still somewhat less "ok" at somewhat higher currents.NOTE: [If you found a problem with heating in the right-hand circuit (unlikely with $I_led=15:textrmmA$), I might parallel two small signal BJTs as $Q_3$ and, if being really picky, might only connect the collectors and bases together, but not connect the emitters directly -- instead using a small series resistor in each emitter leg before connecting them together. In this picky case, I would select these two emitter resistors to drop about $200:textrmmV$, so with $I_led=15:textrmmA$ these would probably be $12-15:Omega$ resistor values.]I get my BJTs at about 3 for a penny. My resistors cost me as much, too. So that's about two cents for the right-hand circuit, plus labor, solder, shrink-wrap, and the LED of course. In short, the electronics bits are essentially free and they are not boutique parts and never will be. So it's good in that sense, as well.
Is It Appropriate to Mute Others in a Video Call
I think the most appropriate thing to do is to mention in the call that a person is unmuted. Depending on culture you can mention who is unmuted. You can do this no matter if you are the organizer or not, if it's a problem for you it's most likely a problem for other persons as well.1. Can I get in trouble for smoking on a video call while working from home?I am rabidly anti-smoking, but I find their argument, as presented, absurd. To say that your office is a smoke-free workplace and since you are now working from home, your home is the office is outrageous. Offices have non-smoking policies in their buildings to avoid polluting the indoor air in the workplace, and I am glad they do. Back in the 1980's I worked in an office that allowed smoking at your desk, and it was awful. The building had poor air quality to begin with, and the cigarette smoke made it much worse.However, when you work from your own home, the air quality of your home is your call. If you choose to smoke the health consequences are yours to deal with. Had they said that smoking during video meetings is not allowed it would be a much more honest and legitimate argument. I am a manager, and would complain if any of my people smoked during a video conference because it is now considered unprofessional in the workplace, and projects a bad image. I would talk to the person and frame it that way, and ask the person to refrain from smoking during video meetings in the future. I would never presume to tell them that they could not smoke in their own house however. (I am friends with most of my co-workers, and might push on them to stop "driving nails into their coffins" since cigarettes kill a significant portion of their users over the years, but that would be a person-to-person message, not a manager to employee message. )I do not know if your employer has legal grounds for their position or not. I would suggest talking to a lawyer before deciding to fight it. As a new employee, it's probably safest to just respond by apologizing, saying that you were not aware of the rules, and ask for documentation on those rules in order to avoid future accidental violations.2. In Carly Rae Jepsen's music video for call me maybe what does the guys tattoo say on his chest to the right? ?Carly Rae Jepsen Tattoos3. How can I do a WhatsApp video call on my laptop in Windows 10?Did you know that you can make a whatsapp video call using your laptop?But you never found the option on the WhatApp application, so how can I make a Whatsapp call on desktop? Are you surprised?Yes, it is true that you cannot make a Whatsapp video call by using the WhatsApp desktop but there is certainly a way to make a WhatsApp video call on your Windows/MAC. And that is the point for me making a post for you.Well! If reading is boring for you then watch this videoBut if you are a person who enjoys reading then pay strong attention to my post. First, you need to download Bluestacks. Once it is downloaded, follow all the given steps.Step 1: Open BluestacksStep 2: Connect your Google Account.Note: Once the google account is linked to Bluestacks. A windows will appear in the same way you do over your phone.Step 3: In the search bar, search for WhatsApp and hit install.Step 4: Open the App and go through the set up procedure. Link your Whatsapp number. And click on video call button.That's it. Job is done and you can call anyone you like. Now, you know how to make a video call using your MAC book or Desktop.Was this easy for you? Let me know in the comments.How can I do a WhatsApp video call on my laptop in Windows 10?.4. I can't use video, call, or voice clip on windows live messenger. Someone please tell me what to do.?get Skype or use the inbuilt video chat in Gmail other then that, you need to really give more information. does it have the correct and fully updated drivers for the camera? is windows live messenger updated? maby your hardware is not configured properly go to control panel > sounds and audio devices > audio tab and check if your inbuilt microphone is set as the default inbuilt hardware like a camera or microphone usually come with a setup disk or driver disk try reloading the driver
Tears Over Bedroom Furniture?!? Maybe Notsays the Little Girl!
My new bedroom furniture was just delivered. I am so excited, ripping thru boxes like a kid on Christmas morning. Putting everything together, getting it all Feung Sheu! Its all done and i sit there exhausted looking at my beautiful new bedroom! Suddenly I choke up and tears fall from my eyes, streaming down my cheeks. I am taken aback. Why am i crying like this?Slowly I begin to remember. I can see a little girls bedroom in my memory. My new furniture is all white. With a matching dresser and mirror. A nightstand. All white. Like a little girls bedroom set only big style! Like the one i always imagined a little girl should have, like i should have had. Like i used to dream about when i was little. Why didnt i see this before? When i was picking it out I just like the white style because it was fresh and different than the expected Oak or dark wood styles i was seeing every where else. Or so i thought.I was even more excited than before! I just gave myself the best present i could have ever gotten and i even did incognito of my conscience mind! I gave my little girl inside a present that was long overdue. I felt so spoiled and sweet and warm. And a little bit sad. I should have gotten this as a little girl. This and so many other things.My childhood is something I dont like to talk about much. I dont like to live in the past or even remember i had one. This is somewhat of a problem for me, at least several therapists and psychiatrists tell me it is. I was raised in a very religious oppressive environment where i was ignored and deprived of even the most basic of needs. Its difficult for me to complain because i made it thru and so many other children had it worse than i did, of that i am sure.Anyway, today is a great day for me! Today i made up for one thing. Today I gave my little girl a present and righted a wrong in my past. It feels good. So today I cry. Tears of joy, tears of redemption, tears of a little girl so happy to sleep in her beautiful white bed! Yaaaay! .
Opinions on My Blog Name?
Opinions on my blog name?It's cool! You could change electric to eclectic. :)— — — — — —A good name for a baseball blog?Ball talk. Cool avatar BTW ;-)— — — — — —BlogI am SUPER pleased with my new Wood Lathe! I turned in on and I was working in minutes. I was really pleased with this Wood Lathe. Arrived with all accessories as advertised. Has been a very reliable and fun little machine. While exploring the top Wood Lathes Under $2000, we evaluated a number of selections that are purchasable right now. We were surprised to find more excellent choices than we predicted. The one that really rose to the top of the bunch was the WEN 3421 Wood Lathe. The 3421 Wood Lathe by WEN is the perfect option choice for experts and hobbyists alike. This Wood Lathe offers several fantastic features. This Wood Lathe is terrific for use at home and also at work. The WEN 3421 is produced with premium craftsmanship. There's a reason why WEN has track record as a top Wood Lathe manufacturer. The WEN 3421 is additionally a very reasonably priced Wood Lathe. WEN chose to price this Wood Lathe at just $135.18. It's really incredible that WEN manages to sell these Wood Lathes at that price. We looked at competing Wood Lathes for sale that are similar quality and far more expensive. This Wood Lathe also has high ratings. The WEN 3421 has been reviewed on Amazon 392 times. Genuine users have given the tool an average rating of 4.3 out of 5 stars. This shows clearly that the majority of people who have purchased the WEN 3421 Wood Lathe by WEN are very satisfied with the tool.— — — — — —blog topics please help ?First of all good luck, blogs are really hard to keep up with and it always depends how much time you have and the age range you are trying to reach. Also it helps to get your blog more noticed by spreading the word on the internet, not like an ad but more like a "hey this was cool!" rumor kind of thing. Topics: News is always well "new" sodiscussingg some things about certain events. Baking, there are entire blogs dedicated to trying out and recommending certain foods, i have come across quite a few jut simply dealing with cupcakes! Also its how Julie got famous (see the movie Julie &Julia) Speculation: maybe you noticed something odd and you want to share it, in this case its easy to put in a comments box to discuss this with other online people who have noticed the same or a similar thing. Trips, always a good topic, they show what kind of person you are by putting in your perspective of a new place or people depending on where you are from. Art, maybe you passed by a new store/gallery and you went in just to check it out. If you give your opinion and people have the same idea or due to that opinion they go to the store and get the same impression that shows them that you may be interested in the same things. Updating on a certain event, maybe you have a big project you have to do for work or school, you can post updates on how your doing, what your doing and what it is for. Music, always a world wide topic no matter where you are. Go to other blogs and see what they are posting, especially the popular ones since that it what you are aiming for.— — — — — —ideas for my new blog?Try eating different things each day and comparing your crap with an HD photograph. Ive never ever seen a blog even some what close to that. It's bound to be a classic— — — — — —A name for a fashion blog?Some of these are way too the last 3. Closet Couture sounds kind of cool but Pinstripes and Pearls SOUNDS the best. If your fashion blog has absolutely nothing to do with jewelry or rather, clothes that have pinstripes, the name would be ill-fitted though.— — — — — —bike pictures website or blog?it has pictures of road bikes, hardtails, full suspension, single speed and rigid bikes. And it has the weights of each bike.— — — — — —Is a blog right for me?yes , suitable for you
Do Positive Coordinate Locations Give More Ore in Minecraft?
Pre-1.6, a rounding bug resulted in the South-West quadrant yielding more ore. The bug is fixed as of 1.6:1. Generalization of a theorem of Øystein Ore in group theoryThis is not a proper answer, but is a bit too long for a comment. You should look at the following paper:Groups and Lattices by P.P. PalfyFirst, he states a stronger version of Ore's result:Theorem: Let $G$ be any group. The subgroup lattice $mathcalL(G)$ is distributive if and only if the group $G$ is locally cyclic. (i.e. every finitely generated subgroup of $G$ is cyclic.)Second he states a theorem (proved by various people at various times, sometimes erroneously):Theorem If $D$ is a finite distributive lattice, then $D$ is isomorphic (as a lattice) to the lattice of normal subgroups of some finite group $G$.Finally the result that may be of most interest to you:Corollary 5.3 For every finite distributive lattice $D$, there exists a finite group $G$ such that, for $H=(g,g) mid gin G$, then the lattice of subgroup inclusions $mathcalL(Hsubset (Gtimes G))$ is isomorphic to $D$.Perhaps you know all this already...2. Where can I download Ore Ska Band songs mp3 for free?if there are videos of this stuff on youtube.3. Skyrim - where can i find ebony ore?I cant remember the name of the Orc stronghold, but that is where to go. There is a mine inside the stronghold with many ebony deposits4. How Dangerous are Nuclear Waste when compared with Ore Radioactive Materials?Nuclear waste consists of many different radioactive isotopes, with widely varying half-lives, producing different types of radiation. Some products are also highly toxic (including plutonium). Naturally occuring uranium emits a relatively low level of radiation, as you can tell from its very long half-life. Some waste products are very much more radioactive, and have much shorter half-lives, although still long enough to need a long-term disposal solution. There is evidence in a number of places of ancient naturally occurring nuclear reactors. There are also questions over whether radiation is as harmful to people as has been thought, up to certain limits.5. What is the chief ore of aluminum?Bauxite6. An ore car of mass 44000 kg starts from rest and rolls downhill on tracks from a mine.?Ore Car7. How is that minerals are found in veins of ore?WAY oversimplified! Suppose tha the earth did indeed start out at some point after the big bang as an amorphous homogeneous blob. The fact that it was spinning and cooling introduce a host of physical factors that would introduce inhomogeneity. For example, the crust is in the solid state. Differential temperatures, rates of cooling, pressures would drastically alter the rates and positions of crystallization and deposition of various minerals, according to mass, density, crystal structure, local chemistry. Further, secondary effects such as erosion and sedimentation could differentially deposit minerals according to physical characteristics, even if the starting mineral material were homogeneous.8. The desert of ore, what would the flora and fauna of it be like?As the other answers have pointed out, you are not going to have a lot of Earth-normal flora and fauna that will survive out on the ore sands. Heavy metal toxicity is pretty gnarly, and when it does not kill you quickly, it tends to sterilize you, so you are not going to be having a lot of offspring that might be slightly-more-adapted.That said, there are such things on Earth as plants that hyperaccumulate heavy metals, enough so that there's discipline called "phytomining" that involves using metal-accumulating plants to leech stuff out of the soil that's later processed. (Here's more information on phytomining in the context of gold phytomining, and here's a Wikipedia list of hyperaccumulating plants: list of hyperaccumulators. Quickly scanning that list, I see mostly water plants and some temperate grasses with the notable exception of creosote bush, which is very hardy desert plant.) Hyperaccumulators tend to do really well in the presence of heavy metals because of their stellar ability to sequester the stuff in their leaves and resist its toxic effects. Throw in a bit of ambient magic, and this would be the way to go for the "metal plant" effect you want--though less "steel cactus" and more "copper creosote bush".The neat thing about this is that your desert-dwellers could exploit these hyperaccumulators to make their own metal trade easier. Creosote, for example, happens to hyperaccumulate only copper, so planting a bunch near a mixed ore sand obviates the need to refine it to get the copper out. Just let the creosote do it and collect later. I could see them gradually developing a science of phytomining by observing what plants grow well next to which ore sands, and what kind of metal can be reclaimed from those plants when they are processed. (This is something you may also want to bring in the magic for, since processing metals out of plants in the real world involves some very strong, very nasty chemical processes. )As for the animals, well--there's magic in the setting, so the sky's the limit on what you want to do with that. Keep in mind, though, that if an animal--through ambient magic--adapts to live out in this extreme environment where it picks up all kinds of trace metals in its food, it's probably also going to adapt to make that metal do something for it. Deposition in bone is the most likely initial start, since that's where heavy metals already bioaccumulate in vertebrate animals, but it will spread out from there. People who are exposed to a lot of silver in their diet, for example, eventually change color as it gets into their skin! (And there's another potential economic opportunity--if the metals that get into the local fauna deposit in their skin, fur, scales, or shells and result in attractive coloration that's long-lasting after the animal dies, you've got some really pretty exotic animal parts you can sell to supplement all the ore you are shipping out.)You would not, however, get much in the way of non-magical, non-plant-life in this environment that was any bigger than bacteria. That does not mean, though, that you can not go pore over some lists of desert fauna and base some magical animals on them. Personally, I would think tortoises would do pretty well if they could magically resist heavy metal poisoning and incorporate all that metal they are picking up into their shells
sin datos
Contact Us
Contact Person: AI customer service
Tel: +86 0757-23368757
Address: No.119, Shuiyin Road, Yuexiu District, Guangzhou 
WHATSAPP: 13885223350
Better Touch Better Business
Contact Sales at JuJiao.
Call Us
+86 0757-23368757
Copyright © 2021 FOSHAN SAN DUN Furniture CO., LTD. | All Rights Reserved |Sitemap