LCD Monitor Arm

it is simply adjustable which implies it needs minimum effort but can achieve maximum precision.LCD Arm suspends your flat panel above your desk, allowing you to quickly reposition the monitor which reclaim your desk’s work surface, even as you work, in greater ergonomic comfort. Monitor arm is an innovative best-value product with incredible flexibility.

These are designed to permit effortless height, tilt and rotation adjustment of the monitor by hand. Ruggedly constructed from lightweight aluminum alloy, the arms mount easily allowing the user to save desktop space while providing maximum viewing flexibilityAdapt company is one of the best design sales and manufacturing company located in the USA.We provide our offers an international team of consultants to assist your work.

There can be no better place to invest with our people. There is no investment an organization can make that will give them a better return than investments with their people. That is the role of management Lace needs.

It was formed by bringing standard ergonomic office solutions.We provide you services as· Ergonomic Assessments· DSE Assessments· Design and Space Planning· Installation· Project Management· Reconfiguration and Retrofits· E-Procurement· Furniture Selection· Budget analysis· Financial Alternatives· Sound Masking· Delivery· Lighting AssessmentsFor more information visit us at USA 17650 32nd Place, Ste 10B Aurora, CO 80011, Toll free: 844–538–5659.


How can I design a safe LED night light for kids?

I am unsure why you think an existing off the shelf night light would not be safe? Almost every electronic product sold to consumers has to go through extensive safety testing. Assuming you are using a grounded outlet, and you have modern GFCI circuits installed in the bedroom as is standard for current code, any spillage that would be dangerous would cause the circuit breaker to cut the power. Further more, you presumably are standing right there if there is a spill, and can take action.

Without knowing the physical configuration of what you are trying to do, it is hard to give much more advice, but it seems like you are overthinking this. I understand that when you have a new baby, you aren’t getting consistent rest, and if this is your first you are concerned about safety. You may also consider just buying a battery powered LED night light with a screw for the battery cover.

That way you don’t have to worry at all about any electrocution risk, which is small anyway. Keep in mind that until a baby can roll over and crawl (4–6 months) they are not going to be at risk of messing with any electrical outlets, but I don’t know if you are talking about a baby or if you have older kids as well

sin datos
Artículos recomendados
LG Display Has Stopped Producing Liquid Crystal Display (LCD) Panels for IPhone
. The factories that produce these panels are clearly turning into manufacturing sites for automotive display panels.According to the elec report, the factory is moving from the LCD panel used in the iPhone to the car display panel site. In the third quarter of last year, the South Korean technology giant has stopped iPhone LCD production on turtle tail's AP3 production line, and even stopped producing panels for other smartphones in the fourth quarter of 2020. For those who don't know, the LCD iPhone production line has been very low in the profitability of LG display.This is particularly important after the Cupertino based giant's latest iPhone series has recently been converted to OLED (organic light emitting diode) panels. Therefore, it is expected that the sales volume of OLED panel of sports iPhone will also exceed that of LCD panel model this year. At present, Apple iPhone se 2020 using LCD panel will use LCD panel made by JDI and sharp, and LG display has tried this method, but failed.The company's AP3 production line will now focus on the production of automotive display panels, which will produce low temperature polycrystalline silicon (LTPs) thin film transistors (TFTs). LTPS TFT is a better alternative to the amorphous silicon (a-Si) TFT panel used by LG display. LG display plans to scale down due to competitors such as BOE from China and AUO from Bay. These LTPS TFT panels have become more and more popular in the recently launched new models.
ROM Chip Commonly Used in LCD Color Display
In the display, flash chips of different models are required to save OSD setting parameters and call preset display mode, so that the host can find the display model and store MCU program data.(1)24C16On the LCD driver board, 24C16 is generally used to store the user mode and preset mode of the display, as well as the brightness, contrast, sharpness, color temperature and other data of the OSD panel adjusted by the user. The physical chip is shown in Figure 13, and the preset data of factory mode is also stored in 24C16. The more preset modes and user modes of the display, the larger the storage space of the chip. Therefore, we may see that 24c32 and 24C08 are used to store OSD data in actual maintenance.The data in the chip is very important. If the data is accidentally damaged or lost, it will lead to very strange fault phenomena such as unable to start the machine, abnormal image, undetectable signal, color deviation, flower screen and so on.(2)24C02The chip is generally used to store the model, manufacturer, supported resolution type, production date and other information of the display, as shown in Figure 14. The chip is usually located near the VGA and DVI interfaces to complete the information exchange with the PC host. If the VGA interface does not have this chip, the host will not be able to recognize the display model, can not automatically match the resolution supported by the display, and can only display the plug and play display. However, the chip data near the VGA interface is damaged. It does not affect the operation of the display. The display works even if it is blank or not. If the DVI interface does not have the chip or the data in the chip is damaged, the DVI interface device can only be used after the computer is restarted, and can not be plug and play when the host is working normally. The model of this kind of chip used in Samsung LCD is a21sc, and the reading method is the same as 24C02.
Teach You How to Adjust the Monitor
As a graphics worker, when the painstakingly processed pictures are printed, he finds that the color is not what he wants at all. I believe the mood will be very complex, and the work of several hours needs to be overturned and started again. In this article, we will specifically discuss why such problems occur and the solutions to such problems.Why are there different colorsIn the process of digital image from input device to display, then to output device or final image file, it is very difficult to maintain the original color. Because each related hardware or software has its own color processing technology and also represents different color restoration characteristics, the scanned photos and images will show different colors on the display, color proofing or printed manuscripts.The fundamental reason for this is that due to technical limitations, each display or processing device cannot faithfully reproduce the color of the original, and different devices use different technical principles to generate color. Another point is that the printing industry usually adopts CMYK mode, while it is RGB mode when displayed on the computer. The different number of colors also causes color display errors.Can you see the difference between the images output in two different modes (CMYK on the left and RGB on the right)What is the normal remedyGenerally speaking, in order to compensate the influence of each device on the image color and the deviation and loss of image files in the transmission process between devices, we can compensate through two methods: the image processor can adjust the color manually repeatedly, or use the color management system to control the whole process. However, for ordinary users, if the color is adjusted repeatedly, it is undoubtedly too troublesome, and the deviation caused by the technical problems of the image processing equipment itself is not within the scope of our ability to solve. Therefore, what we can do is to correct the color difference caused by different color display modes between the display and the output equipment.Correction of color difference using display driverFirst, right-click the desktop and select "properties", then enter the "Settings" page, select "advanced", click the "monitor" page, and select "properties" to update the display driver. The display I use is LG 775ft 17 inch flat CRT display. Download the latest driver package from the Internet and find the driver installation of 775ft. If we continue to use the plug and play display driver, it will still have a certain impact on the color performance, so we choose to install the special driver for the display. While installing the driver, the color management has been updated to the management profile of LG 775ft.The display driver system is installed correctly, and the color profile is also selected correctlyNow let's start Photoshop 7.0, click 'Edit' and select "color setting" in the drop-down menu. Then select "LG 775ft profile" in RGB (R) option in color setting, and set CMYK (c) as "retain embedded profile" and gray (y) as "retain embedded profile". Then restart the Photoshop software to complete the setting, so as to ensure that the color of the picture processed by Photoshop is similar to the last printed picture to the greatest extent, and you can get the WYSIWYG image.Import the color profile of the display in PhotoshopMaybe some readers can't find the monitor driver and color management software because they bought the monitor earlier or don't know the model. They can also set the color temperature of the monitor to 9300k. You can specify the system ICC as the same ICC as the monitor model (usually in the monitor installation CD), such as Trinitron compatible 9300k g2.2.icm, diamond compatible 9300k g2.2.icm, or use the ICC monitor profile builder software to generate the ICC characteristic file of your own monitor. Finally, when setting Photoshop software, set the RGB of workspace to the same file name as the system ICC.Don't think that the display driver has no function. Its function is not only to identify the display, but also includes the color configuration file in the display driver. A small operation can let us get the WYSIWYG picture.Tip: what is ICCICC is a cross program standard defined by the International Color Consortium, which is used to accurately reproduce colors between different platforms, devices and ICC compliant applications (such as Adobe Illustrator and adobe PageMaker).
Kitty Is Being Stubborn!?
** FIRST OF ALL: Please DO NOT rake your cats paws over the scratching post!! This will REALLY turn them off to using the post and make the problem worse. You can squirt her with a little water from a spray bottle when she even gets near the area you do not want her to scratch.The water spray bottle is very effective, does NOT hurt them and my cats know I mean "NO" when I just reach for the bottle--I do not even have to pick it up anymore. Cats have scent glands in their paws and when they scratch a surface, they are marking their territory. The scratching also removes the outer cuticle of the nail that dries out and needs to be removed. This also explains why my declawed male cat (NO, I did not declaw him--he came that way!) also uses a scratching post for claws that no longer exist--he's marking his turf. I thought he was just being silly. Your cat is doing "horizontal" scratching as opposed to "vertical" scratching and apparently there is a difference in the reason for both types. indoor cats prefer one position while outdoor cats like the other. My talented kitty can do BOTH because she was an outdoor cat that I brought inside! She is a "multi-tasker".She would scratch furniture and almost anything else I did not want her to scratch until I put an unfinished wooden shelf that I would bought from the "cheap bin" at IKEA for about 50 cents. I had it in mind for a cheap shelf to put up somewhere but Miss Kitty decided she liked to scratch it instead, so I have it propped up against a chair and she loves it! Now that is HER shelf/post and she does not go after the sofa or floor carpet anymore...usually. The site I mentioned is very helpful and answered some questions I had about feline behavior. I suggest anyone interested in cats read it. Hope this helps! Please hug your kitty for me.1. What to do with my crazy cat?Awe, I am sorry to hear that :(. But maybe there is some help for her. The main reason kitties do things like peeing on the bed, furniture, etc. when they are otherwise litterbox trained is because they have a stressor in thier lives. This could be anything, from a new pet to a simple change in your schedule. Believe it or not, cats are very in sync with your life and once you change something, they are reluctant to change with you. As far as the litter pan, i have found that Arm & Hammer makes incredible kitty litter. Another thought would be buying a new litter pan. If the one that you have is more than 6 months-1 year old, i would suggest getting a new one. Even if you clean it out, there is still the scent that the ammonia in the cat pee leaves behind. And as for her behavior towards your children, always remember, as i am sure you already know, to put your babies first. If she acts out to them in a way to hurt them, that is where you may have to find her a new home. However, she is probably just a grouchy kitty and likes to be left alone. I know that this is a very stressful situation to be in, but hopefully you and your kitty will be doing better soon! Take care, and good luck!.2. I need to find a furniture store that sells teenage bedrooms set that fits in an attic that has a slope.?yeah we had a bedroom like that and made out own, built in furniture - it was fun3. Is a lamp a piece of furniture?It's an accessory4. How do I get melted Junior Mints on my car seat cleaned?Stop by the office of your favorite carpet.upholstery cleaner and have them treat the candy and then rinse and extract it rom the fabric. I have a carpet cleaning business, we are always doing services like that. Sometimes a car cleaning issue is addressed when we are at the home to clean the carpets or furniture5. I have bad credit... Where and how can I get a loan? (Limit:$5,000?)?instead of taking out a loan to cover your debts and to buy new furniture and take on more debt, try taking a second job instead. You can use that money to pay down your current debts starting from the smallest to largest debt. Then save up money and pay cash for furniture - even if you have to buy one piece at a time. You wo not need credit if you can pay cash. Check out what Dave Ramsey says about getting out of debt and building personal wealth
How to Bring More Outside Light into a House
Dark rooms can make your home feel small and dreary, and letting some natural light in is a great way to open up the space. The easiest way to bring more outside light into your house is to clean and open up your windows so they are letting in as much light as possible. However, even if you do not have a ton of bright windows in your home, there are still things you can do to make it sunnier, like painting your walls a lighter color and using reflective decor. For particularly dark rooms, you can also use LED lights and special fixtures that replicate natural lighting.1. Neon or LED lights under a car in canada legal?Under Car Led Lights2. if only led lights, nation wide were used, what reduction in electricity is there?What nation? The US? Well, the Department of Energy puts it in the 300 terawatt range, though they do not say 100% or cover a mix of LED and Fluorescent.3. Are these 3 switches wired correctly?The switches appear to be wired correctly. The switch on the right appears to be an LED-compatible, triac dimmer. But you have one triac-dimmer switch for LED lights (on the right), and another switch that controls the fan plus another LED bulb? This bulb is the problem. .. or this fixture cannot be used with that particular model of LED bulb.Generally, LED dimmers are not the same as fan dimmers. You can not dim many models of LED lights with a fan dimmer unless you had LED bulb(s) that are specifically compatible with traditional or fan dimmers (now technically, fan dimmers are actually a little different than traditional dimmers, but for your issue that should not really matter). I think you need to find an LED bulb that says it is compatable with traditional dimmers for the one socket being operated by the fan switch4. how do i wire led lights in my car? i have an extra set from a 2006scion tc for my car, a mazda 626(1999).?On a car the ground is the body of the vehcile. Other than that, what kind of l.e.d.'s are they...what are they for? interior, outside, decorative?5. How to power a circuit of LEDs with maximum 5vThe company, Evans Designs, makes LED lights for electric trains. They are not all that expensive, either, and come with necessary circuitry.To a first approximation, common $5:textrmmm$ LEDs should be operated with a constant current and not a constant voltage. Clearly, you know that. But given the wider dynamic range of your source voltage, a special circuit to provide a constant current would help.If you want to try doing this with just one (or two) BJT(s), you could attempt either of the following two choices at very low cost.simulate this circuit - Schematic created using CircuitLabCurrent for the LED in the left-hand side circuit comes through $R_2$, with $Q_1$ diverting (it's a shunt regulator) any extra current through its collector. $R_2=fracV_BE_1I_led$. (You can assume that $V_BE_1approx 760-800:textrmmV$ for a small signal device.) And $R_1=fracV_min-V_led-V_BE_11.5cdot I_led$, where $V_min$ is your minimum DC operating voltage and $V_led$ is, of course, your LED's operating voltage. The serious problem for this circuit is that $R_1$ will dissipate terrible amounts of power when operating at the higher voltages. Perhaps a watt, or more, as it has to drop all that extra voltage.The right hand circuit attempts to deal with that problem. In this case, $Q_3$ will be dissipating the excess power at higher voltages. But since the current is fixed (roughly) across the input voltage ranges, the power is not terrible. Perhaps $200:textrmmW$ when talking about $I_led=20:textrmmA$. But keep in mind that this goes linearly upwards with increasing LED current and linearly downward when talking about less LED current. So just be aware of that.In this right-hand circuit, $Q_3$ wo not be operated in saturation. With $V_BE_2approx 680:textrmmV$ and $V_ledle 3. 2:textrmV$, $V_CE_3$ should be enough to stay out of saturation. However, if the LED voltage is more, then it's possible that $Q_3$ might go a little into saturation. So I would recommend assuming $beta_3approx 50$ for purposes of setting $R_4$. So, $R_4=beta_3cdotfracV_min-V_BE_2-V_BE_3I_led$ to supply needed base current for $Q_3$ (plus a little, given that $beta_3$ is taken as a relatively low value.) Without $Q_2$ and $R_3$ present, there would be no current control. But with $R_3=fracV_BE_2I_led$, the voltage developed across $R_3$ will begin to turn on $Q_2$, which will shunt (sink) base current away from $Q_3$ when the LED current rises more than desired. The result of all this on the right-hand circuit is that there is not so much of a waste of power. It's better, in short, than the left-hand circuit when considering dissipation. But it costs you some complexity. Still, it's small and easy enough that you can pack it into heat-shrink tubing and be done with it. It should work fine. My recommendation, of course, is the right-hand circuit. Even with higher desired LED currents, you can probably get away with a small signal BJT. But I would recommend testing that idea, too. It's a maybe and not a for-sure. One thing I worry about here is that there is no temperature compensation at all and if $Q_3$ heats up a lot and passes that heat along to $Q_2$, then base-emitter junction voltage of $Q_2$ drops significantly and this will reduce the LED current. But I think it may be fine for $20:textrmmA$ and may be still somewhat less "ok" at somewhat higher currents.NOTE: [If you found a problem with heating in the right-hand circuit (unlikely with $I_led=15:textrmmA$), I might parallel two small signal BJTs as $Q_3$ and, if being really picky, might only connect the collectors and bases together, but not connect the emitters directly -- instead using a small series resistor in each emitter leg before connecting them together. In this picky case, I would select these two emitter resistors to drop about $200:textrmmV$, so with $I_led=15:textrmmA$ these would probably be $12-15:Omega$ resistor values.]I get my BJTs at about 3 for a penny. My resistors cost me as much, too. So that's about two cents for the right-hand circuit, plus labor, solder, shrink-wrap, and the LED of course. In short, the electronics bits are essentially free and they are not boutique parts and never will be. So it's good in that sense, as well.
Is It Appropriate to Mute Others in a Video Call
I think the most appropriate thing to do is to mention in the call that a person is unmuted. Depending on culture you can mention who is unmuted. You can do this no matter if you are the organizer or not, if it's a problem for you it's most likely a problem for other persons as well.1. Can I get in trouble for smoking on a video call while working from home?I am rabidly anti-smoking, but I find their argument, as presented, absurd. To say that your office is a smoke-free workplace and since you are now working from home, your home is the office is outrageous. Offices have non-smoking policies in their buildings to avoid polluting the indoor air in the workplace, and I am glad they do. Back in the 1980's I worked in an office that allowed smoking at your desk, and it was awful. The building had poor air quality to begin with, and the cigarette smoke made it much worse.However, when you work from your own home, the air quality of your home is your call. If you choose to smoke the health consequences are yours to deal with. Had they said that smoking during video meetings is not allowed it would be a much more honest and legitimate argument. I am a manager, and would complain if any of my people smoked during a video conference because it is now considered unprofessional in the workplace, and projects a bad image. I would talk to the person and frame it that way, and ask the person to refrain from smoking during video meetings in the future. I would never presume to tell them that they could not smoke in their own house however. (I am friends with most of my co-workers, and might push on them to stop "driving nails into their coffins" since cigarettes kill a significant portion of their users over the years, but that would be a person-to-person message, not a manager to employee message. )I do not know if your employer has legal grounds for their position or not. I would suggest talking to a lawyer before deciding to fight it. As a new employee, it's probably safest to just respond by apologizing, saying that you were not aware of the rules, and ask for documentation on those rules in order to avoid future accidental violations.2. In Carly Rae Jepsen's music video for call me maybe what does the guys tattoo say on his chest to the right? ?Carly Rae Jepsen Tattoos3. How can I do a WhatsApp video call on my laptop in Windows 10?Did you know that you can make a whatsapp video call using your laptop?But you never found the option on the WhatApp application, so how can I make a Whatsapp call on desktop? Are you surprised?Yes, it is true that you cannot make a Whatsapp video call by using the WhatsApp desktop but there is certainly a way to make a WhatsApp video call on your Windows/MAC. And that is the point for me making a post for you.Well! If reading is boring for you then watch this videoBut if you are a person who enjoys reading then pay strong attention to my post. First, you need to download Bluestacks. Once it is downloaded, follow all the given steps.Step 1: Open BluestacksStep 2: Connect your Google Account.Note: Once the google account is linked to Bluestacks. A windows will appear in the same way you do over your phone.Step 3: In the search bar, search for WhatsApp and hit install.Step 4: Open the App and go through the set up procedure. Link your Whatsapp number. And click on video call button.That's it. Job is done and you can call anyone you like. Now, you know how to make a video call using your MAC book or Desktop.Was this easy for you? Let me know in the comments.How can I do a WhatsApp video call on my laptop in Windows 10?.4. I can't use video, call, or voice clip on windows live messenger. Someone please tell me what to do.?get Skype or use the inbuilt video chat in Gmail other then that, you need to really give more information. does it have the correct and fully updated drivers for the camera? is windows live messenger updated? maby your hardware is not configured properly go to control panel > sounds and audio devices > audio tab and check if your inbuilt microphone is set as the default inbuilt hardware like a camera or microphone usually come with a setup disk or driver disk try reloading the driver
Tears Over Bedroom Furniture?!? Maybe Notsays the Little Girl!
My new bedroom furniture was just delivered. I am so excited, ripping thru boxes like a kid on Christmas morning. Putting everything together, getting it all Feung Sheu! Its all done and i sit there exhausted looking at my beautiful new bedroom! Suddenly I choke up and tears fall from my eyes, streaming down my cheeks. I am taken aback. Why am i crying like this?Slowly I begin to remember. I can see a little girls bedroom in my memory. My new furniture is all white. With a matching dresser and mirror. A nightstand. All white. Like a little girls bedroom set only big style! Like the one i always imagined a little girl should have, like i should have had. Like i used to dream about when i was little. Why didnt i see this before? When i was picking it out I just like the white style because it was fresh and different than the expected Oak or dark wood styles i was seeing every where else. Or so i thought.I was even more excited than before! I just gave myself the best present i could have ever gotten and i even did incognito of my conscience mind! I gave my little girl inside a present that was long overdue. I felt so spoiled and sweet and warm. And a little bit sad. I should have gotten this as a little girl. This and so many other things.My childhood is something I dont like to talk about much. I dont like to live in the past or even remember i had one. This is somewhat of a problem for me, at least several therapists and psychiatrists tell me it is. I was raised in a very religious oppressive environment where i was ignored and deprived of even the most basic of needs. Its difficult for me to complain because i made it thru and so many other children had it worse than i did, of that i am sure.Anyway, today is a great day for me! Today i made up for one thing. Today I gave my little girl a present and righted a wrong in my past. It feels good. So today I cry. Tears of joy, tears of redemption, tears of a little girl so happy to sleep in her beautiful white bed! Yaaaay! .
Opinions on My Blog Name?
Opinions on my blog name?It's cool! You could change electric to eclectic. :)— — — — — —A good name for a baseball blog?Ball talk. Cool avatar BTW ;-)— — — — — —BlogI am SUPER pleased with my new Wood Lathe! I turned in on and I was working in minutes. I was really pleased with this Wood Lathe. Arrived with all accessories as advertised. Has been a very reliable and fun little machine. While exploring the top Wood Lathes Under $2000, we evaluated a number of selections that are purchasable right now. We were surprised to find more excellent choices than we predicted. The one that really rose to the top of the bunch was the WEN 3421 Wood Lathe. The 3421 Wood Lathe by WEN is the perfect option choice for experts and hobbyists alike. This Wood Lathe offers several fantastic features. This Wood Lathe is terrific for use at home and also at work. The WEN 3421 is produced with premium craftsmanship. There's a reason why WEN has track record as a top Wood Lathe manufacturer. The WEN 3421 is additionally a very reasonably priced Wood Lathe. WEN chose to price this Wood Lathe at just $135.18. It's really incredible that WEN manages to sell these Wood Lathes at that price. We looked at competing Wood Lathes for sale that are similar quality and far more expensive. This Wood Lathe also has high ratings. The WEN 3421 has been reviewed on Amazon 392 times. Genuine users have given the tool an average rating of 4.3 out of 5 stars. This shows clearly that the majority of people who have purchased the WEN 3421 Wood Lathe by WEN are very satisfied with the tool.— — — — — —blog topics please help ?First of all good luck, blogs are really hard to keep up with and it always depends how much time you have and the age range you are trying to reach. Also it helps to get your blog more noticed by spreading the word on the internet, not like an ad but more like a "hey this was cool!" rumor kind of thing. Topics: News is always well "new" sodiscussingg some things about certain events. Baking, there are entire blogs dedicated to trying out and recommending certain foods, i have come across quite a few jut simply dealing with cupcakes! Also its how Julie got famous (see the movie Julie &Julia) Speculation: maybe you noticed something odd and you want to share it, in this case its easy to put in a comments box to discuss this with other online people who have noticed the same or a similar thing. Trips, always a good topic, they show what kind of person you are by putting in your perspective of a new place or people depending on where you are from. Art, maybe you passed by a new store/gallery and you went in just to check it out. If you give your opinion and people have the same idea or due to that opinion they go to the store and get the same impression that shows them that you may be interested in the same things. Updating on a certain event, maybe you have a big project you have to do for work or school, you can post updates on how your doing, what your doing and what it is for. Music, always a world wide topic no matter where you are. Go to other blogs and see what they are posting, especially the popular ones since that it what you are aiming for.— — — — — —ideas for my new blog?Try eating different things each day and comparing your crap with an HD photograph. Ive never ever seen a blog even some what close to that. It's bound to be a classic— — — — — —A name for a fashion blog?Some of these are way too the last 3. Closet Couture sounds kind of cool but Pinstripes and Pearls SOUNDS the best. If your fashion blog has absolutely nothing to do with jewelry or rather, clothes that have pinstripes, the name would be ill-fitted though.— — — — — —bike pictures website or blog?it has pictures of road bikes, hardtails, full suspension, single speed and rigid bikes. And it has the weights of each bike.— — — — — —Is a blog right for me?yes , suitable for you
sin datos
Contact Us
Contact Person: AI customer service
Tel: +86 0757-23368757
Address: No.119, Shuiyin Road, Yuexiu District, Guangzhou 
WHATSAPP: 13885223350
Better Touch Better Business
Contact Sales at JuJiao.
Call Us
+86 0757-23368757
Copyright © 2021 FOSHAN SAN DUN Furniture CO., LTD. | All Rights Reserved |Sitemap