Lightening Blonde Hair at Home....with Lime Juice!?

lightening blonde hair at home....with lime juice!?

Lemons only do it very slightly if you lay in the sun for days. It actually dries the crap out of your hair which also breaks it. I did it to mine and was so peeved when it went like straw. Vinegar and water is good to rinse hair in as it is not acidic. It doesnt lighten it in my experience. My suggestion, get some streaks. The old fashioned ones through a cap... they rock. Better than chunky foils

— — — — — —

To make pico de gallo, do you need lemon juice or lime juice?

Definitely lime! Lemon would work but it would not be true pico. Always cut up the onion first and let it soak in the lime juice while you chop up everything else. The acid in the lime softens the onion a little :).

— — — — — —

How many avos should I buy?

One usually makes enough for the two of us and leftovers. I would get about 6 or 7. Lime juice and or jalapeno tobasco are welcome additions

— — — — — —

who knows recipies good delicous food?

No idea what you want so here are a few very random recipes, enjoy CROCK POT BEEF ROAST 3 to 4 pound roast beef or round steak salt and pepper 1 small onion, chopped 1 pkg. brown gravy mix 1 cup water ½ cup catsup 2 teaspoon dijon mustard ½ teaspoon garlic powder ½ cup red wine (optional) Place meat in slow cooking pot. Sprinkle meat with salt and pepper. Combine remaining ingredients; pour over meat. Cover and cook on low 8-10 hours. If desired, add small peeled potatoes and carrots. Sauce can be thickened with 2 tablespoons flour dissolved in ¼ cup of water. SUMMER LIME CHICKEN TENDERS 2 pkgs. boneless, skinless chicken tenders 1/3 c. olive oil Juice of 3 limes 4 cloves garlic, peeled and minced 3 tbsp. fresh cilantro or parsley, chopped 1/2 tsp. salt 1/2 tsp. pepper, freshly ground Trim fat from tenders. Pound between waxed paper to flatten. Combine olive oil, lime juice, garlic, cilantro, salt and pepper in a bowl. Pour over chicken and marinate 4-8 hours. Grill or broil the chicken tenders for 2 minutes on each side. Yield: 4-6.

— — — — — —

Can I chemically cook meat?

Steak Dianne - marinated in lemon juice or lime juice with herbs and served this way with rice or noodles? It has already been done but is not popular any more because people are afraid of raw meats

— — — — — —

what is the best lime juice to make a margarita?

Fresh squeezed Spanish limes

— — — — — —

I am Looking for a good mixed drink recipe?

Flaming Dr.Pepper- Take a shot glass mostly full of amoretto, add a tiny bit of Bacardi 151 to the top of the glass, light the 151 on fire and drop the shot glass into a mug of beer (8 to 12 ounces) and chug! Believe it or not, it tastes exactly like Dr.Pepper (so if you do not like Dr.Pepper, you wo not like this!) WARNING: be careful when pouring the 151 not to get it down the side of the shot glass, on the counter, and especially not on yourself; when you light the top of the shot glass, it will also light everything else that the 151 got on. ---------------------------------------------------------------------------------- Cement Mixer- pour half a shot of Bailey's and half a shot of lime juice into separate shot glasses. Take the Bailey's in your mouth (but do not swallow) and then take the lime juice in your mouth and then swish them together in your mouth for about 30 seconds before swallowing. This will create a sensation that you surely will not soon forget!

— — — — — —

how do u make a daquri?

InstructionsDifficulty: Moderately Easy Things You will Need: 2 oz. rum of the juice from a large lime to 1 oz agave nectar or sugar syrup Ice Lime wedges Step1 Chill your glass by filling with ice water and set aside. Step2 Fill a cocktail shaker with ice. Add rum, lime juice and agave nectar or sugar syrup. Shake well, for about 10 seconds. Step3 Empty your chilled glass of its water and ice. Step4 Pour your daiquiri through a strainer into the glass. Step5 Garnish with lime wedge and serve. If you prefer, serve your daiquiri over ice. Step6 To make a pitcher of frozen daiquiris with this recipe, fill blender with ice. Add 16 oz of rum, the juice of 3 large limes and 5 to 6 oz. agave nectar or sugar syrup. Add to 1 cup frozen strawberries or other fruit, if desired. Blend well, pour and serve in chilled glasses with lime wedge.

sin datos
Artículos recomendados
Help! Aquarium with Sand and Hang on Filter?
Help! Aquarium with Sand and Hang on Filter?
I have 2 tanks with sand and both have HOB filters. The intake is about 2 inches above the sand and I've not had any problems. I do, however, turn them off for an hour or 2 after I stir the sand.1. Priming side skirts on car with spray can primer?that's ok just make sure you wet sand the 1st 2 coats when dried & dry sand the 3rd coat then put your 4th coat of primer. when dried put at least 3 thin coats of enamel paint while overlapping while you are spray painting. i had to do my hood & when i was finished you would not know the difference between a professional paint job or a do it yourself paint job. hope this helps.2. how can I change the sand in my haywood sand filter?Turn off the pump. Take the top off the filter being careful not to pull the center pipe out. Use a shop vac to suck out the sand but do not push hard on the sand bed. About 1/2 way down go slowly as you will find "laterals" buried in the sand bed. Once you get to the laterals suck the sand out from between them and brush the sand off them. You do not have to get all the sand out but do not leave chunks either. To fill it Add enough water to cover the laterals inside by two inches of water. Pour the sand in slowly so that it settles around the laterals instead of pushing down on them. Once the sand is covering the laterals you can pour the rest of it in less carefully. Brush off the sand from the connections and wash them with water. Replace the top, turn the valve to backwash, turn on the pump, open the bleeder valve to let air escape, backwash/rinse as normal and you are done. You may have a little residual sand being expelled back into the pool but this is normal and will stop. If it continues then you may have cracked one of the laterals inside the sand bed.3. Best Way To Add Plants To Sand Substrate and is there such a thing of adding too many at one time 0?Do you have fluorescent easy for you 5 gallon? usual incandescent easy will now enable flora to strengthen. they will finally die. in case you have the easy and desire to apply flora, then merely purchase low easy stem flora. they do no longer want particular substrate-merely gravel will artwork. If nutrition gets caught, you may constantly use a small gravel vacuum purifier to suck out the junk. Sand would artwork, yet use an exceedingly skinny layer. on your 5 gallon, i might recommend below an inch. the priority with sand is that it will no longer carry your flora. Oh, and you would be able to't vacuum with a gravel vacuum because of fact the sand gets sucked up4. What is a giant crab thing that looks like sand fleas, sand moles, and sand crabs?very confusing subject. try searching on to a search engine. that could actually help!5. what is sand made of?Sand can be made of anything. The word sand is only as description of grain size and not mineralogy. Sand size classification is (smallest to largest)- Very fine sand->62um to 125um fine sand- >125um to 250um medium sand- >250um to 500um course sand- >500um 1mm very course sand >1mm to 2mm You will notice that moving down the size classification (largest to smallest) each size is half the size above it.6. do u think it's possible for a person to blush so hard, that their blood will come out thru their pores?I guesssss. Never see it, though. I read a book of "most embarrising moments" that people submitted to the author. Here were the top two; 1. A lady wrote that she was a motivational speaker, talking to a big crowd in a convention hall. Suddenly, she got sick. So she excused herself from the stage, went behind the screen, down the hall to the bathroom, closed the door to the toilet; and went on for about 10 minutes making various loud groaning noises, digestive and stomach gas noises, etc. Then there was a knock at her stall door. A lady said "excuse me, but you still have your microphone on!" Wow! That was a bad moment. 2. A lady on vacation in the bahamas was walking back from the beach to the hotel. Sand was in her bikini bottom rubbing her skin every step she took. So she ran inside some huge hedges against the building and took her bottom suit off, shook out the sand, wiped all the sand off of her skin (even the tight places), put the suit back on, and walked back into the hotel. The man at the reception counter, pointing to the tinted window along the wall - BEHIND THE BUSHES - said to her; "did you get all the sand out from between your legs?" The lobby was filled with about 30 people who were ALL watching her while she was inside the hedges. She thought the window glass behind her was not see-thru. It was tinted and dark, but definitely see-thru. Longest walk back to any room.
LiTTT Snaps LED Strips Together Without Solder
LiTTT Snaps LED Strips Together Without Solder
Programmable RGB and RGBW LEDs, especially in strip form, have revolutionized the kind of lighting effects that creators can easily make. Working with strips, however, normally means breaking out the soldering iron. If for some reason you need to make changes, you then have to repeat the process over again — hopefully without damaging anything.If you’d prefer for things to be more plug-and-play, the LiTT Snap! system, by Daniel Tooker, features electrical connectors that — you guessed it — simply snap together. They form connections by bending the strip inside of a square piece of RPVC extrusion, or into an equivalent 3D-printed shape. The system is now available on Kickstarter, featuring 90 and 45 degree connectors, extrusion, and the RGBW LEDs themselves, along with the pigtails needed to connect everything to power and your favorite dev board.It’s an interesting concept, but the stretch goals expand things even further, including a 135- and 180-degree connector, as well as mounting hardware, and even a rotating corner connector. As an added bonus, if successful, this campaign will help in the development of the LiTTT HUB. The aim of the hub is to be a connected lighting controller “to rule them all,” further simplifying what you can do with these amazing strips!.·RELATED QUESTIONWere can I get quality outdoor LED lighting for my landscape project?If short maintenance, eco friendly landscape lighting is a precedence for you, outdoor LED lighting is a ideal option for your landscape lighting design. LED landscape lighting offers the protection, security and artistic qualities as any other landscape lighting solution, but it also offers a concentrated ecological footprint and lower maintenance.You can emphasize the beautiful architecture of your home’s external or landscaping with tactically placed outdoor lighting by LV Lightings. While your options may seem endless, it’s significant to believe the role you want your outdoor lights to play. Will they be for security reasons, or for more ornamental purposes?Outdoor LED lightingmay be more luxurious up front than other options, but in the long run it will go easier on your wallet than other bulbs. From LV Lighting’s LED lights have a long life span and offer excellence lighting that is power efficient.Whatever options you settle on, you’re sure to find a extensive selection of charming and well-designed landscape lighting right here on LV Lightings.
Tong Wen, Huawei Wireless CTO: Three Key Contents of 5g Development
On the evening of May 31, at the "first global 5g conference" held today, Tong Wen, Huawei wireless CTO and Huawei academician, said that unlike previous generations of mobile communication technologies, 5g mainly has three application cases: first, enhancing mobile broadband, second, extensive machine communication, and third, ultra-high and reliable low delay communication. Combining these three application cases with other application cases will enable 5g to bring us different businesses and adapt to the development of different industries and markets.According to Tong Wen, the key of 5g mainly includes the following three aspects: first, the network architecture, including what is the network used for? What is the goal? Because 5g involves many industries, we can't afford to build many isolated networks as before, but we need a physical infrastructure to deliver all network services; End to end slicing has increasingly become a very important technology, enabling us to realize application driven networks. Second, wireless access. In the process of standardization, representatives of the industry have reached an agreement that the new wireless will become the representative of 5g. It is abbreviated as Nr. NR will have a new air interface and forward compatibility, which can be supported by many versions, Many applications can be supported, and for the new wireless air interface, we will meet the requirements of energy efficiency, high speed and low delay. Third, inter industry cooperation and intra industry cooperation, which means that our ecosystem must embrace other ecosystems in order to promote and realize the adoption and success of cross industry mobile technology, which is the top priority.Tong Wen said that from the beginning, Huawei firmly believed that 5g is an open technological revolution process. No one can complete 5g evolution, technological revolution and commercial success entirely on their own. Only by adopting an open and unified attitude can we succeed. 5g is an ecosystem. Without a successful ecosystem, 5g cannot succeed. The same is true today. The whole ecosystem and the whole industry must make efforts. Only in this way can we have a unified global standard.
Multiple Games in Same Box Using Same Components. What Was It?
Sounds like Stonehenge: an anthology board game:Stonehenge is an anthology board game, a new concept where five award-winning game designers, all using the same gaming components, create five very different games in one box. The ancient ruin of Stonehenge will never be the same. The five games are:1. Are Shimano components compatible with each other? Do I have to get a specific chain?As long as you use a ten speed chain it should not matter which group you take it from. Normally the higher priced ones are bit lighter but the additional price often does by far not match the lower weight. Also the higher priced ones might last not that long due to the lighter material. Therefore if it's for a bike where you know that it will see some dirt and wear, better get some mid-priced stuff. It might last longer and if does not it wo not drill as big a hole into your budget2. Does Bless Have Costly Material Components?Spell components only cost gold if they explicitly say they do.The flask of Holy Water listed is a full flask which has a number of uses, e.g. throwing at vampires.The Holy Water listed as a spell component would only have to be a very small amount, probably a drop or two. This is like the difference between leather armour and the 'piece of cured leather' required for Mage Armour. As long as you have your component pouch or focus, do not worry about it. But if you found yourself with a flask of Holy Water and no component pouch, you could use a little bit of Holy Water from the flask to cast Bless. With regards to Commune, the vial of Holy Water required does not have a gold cost listed against it. Therefore, it does not cost anything3. why do electrical components burn or explode when excess voltage is applied?in ohms law: P = E^2 / R or Power = volts^2 / Resistance and for a wii the R is const. for 220v this is nearly 4 times the watts crisping your wii.4. Are any of the components particularly weak for this price point?Where I live, that component level is aftermarket groupset, not entry level anymore. You may also found out too, within days/weeks Shimano 105 is the current entry level component and is being challenged by SRAM RIVAL5. How do I find out what electrical components run through my ELEC B fuse?Now days your not going to find anyy cars or trucks with 0 draw on battery ,you have to have what is known as keep alive memory for the cars ECU-radio -air bag systems & on &on, If you are going to let the car set awhile or just do not drive it much use a solar panel to keep the battery up ,est. cost about 39.00 &up you need at least 15watts input be safe my friend PS I have the same problem with a car I do not drive every week6. How to choose a frame to be sure it fits to the owned components?I would say buy a used bike of similar age, and a similar style. That means if its a road bike, do not expect to fit the parts to a MTB. Bicycle makers have regularly changed things over time, so what fits a 1990 bike probably wo not fit a 2000 bike and has no chance of fitting a 2010 bike. I would not waste money on a new frame unless the parts you have are less than 5 years old and show minimal wear.Your other option is to part out what you have on ebay or similar, and buy a complete bike (new or used)7. Building my first PC, could someone look at these components and give me feedback?That's an impressive list...I wish i had that much money.Everything should work fine.You will probrably find it cheaper on newegg rather than locally8. sharepoint 2007 installation an installation package for the product microsoft office document lifecycle components cannot be foundOk I got it.I just searched the installation directory for would lc.msi' and installed it manually and it worked fine.I belive that any error like this can be solved the same way.
You Say Hello?
yo, to my close friends. yo *****, to my best friend. hi, to people i know/dont know. a lot of ways.1. Hello ?? i need help ! ?i have the lg vu too and ruined another phone because i downloaded apps so i would advise not doing it unless you did it thru the phone provider itself and not one of the free, on the side type things2. "Hello, World!”In order to input this program, you will need to switch your Commodore 64 to character set 2 by pressing .The Commodore home computers come with two character sets: "unshifted" mode, which is derived from ASCII-1963 and so lacks lower-case letters, and "shifted" mode, which has both lower- and upper-case letters, but in the opposite order from modern ASCII-1967-derived encodings. Any "Hello, World!' program that produces the requested byte stream on a Commodore will look funny on the Commodore's screen. In the interests of not having to look up a half-dozen obscure Unicode characters, I've chosen to write my program in "shifted" mode, which merely has reversed case.As a side note, the Commmodore Basic interpreter (and presumably many other Microsoft Basic variants) will let you omit the trailing quotation mark if a string extends to the end of the current source line3. How to write hello in different languages?If they traveled to earth in an area craft they will be sensible ample to be trained our language after which converse freely with us. Even if it took rather a while to be trained our language I am certain it might be tops on their precedence to take action. They might without doubt have complicated applied sciences to guide them.4. What is "Hi" or "Hello" on Japanese?tricky factor look into using a search engine it will help5. FOR FANS OF HELLO KITTY?challenging point query onto google and yahoo just that could actually help6. Do you remember the 1963 hit, "Hello Muddah, Hello Faddah"?Yes I remember it. We all sang along with it. It was a fun song.7. Hello Kitty.. A do or a dont?A do not ...unless you are 68. hey just looking for a hello....?Hello! That would depend on a lot of things...if you are young, do not settle for the first one that comes along and be very choosy. If you already know the other someone, try being friends first.9. What does the song "Hello" mean?problematic thing search from google or bing just that could actually help10. When does Hello Kitty Online Open?There's a Hello Kitty Online? Awesome. Sorry I do not know.11. What is hello in spanish?You are kidding, right? Cause, people USE this, all the time.12. Are you obsess with Hello Kitty ?Nope. When I was a little girl, maybe yeah. I still like Hello Kitty, though(:13. What's the Lithuanian word for "hello"?Labas - hello (simple, anytime)Labas rytas - before 11amLaba diena - between 11am - 6pmLabas vakaras - after 6pm14. hello where can i find cute hello kitty desktop themes?problematic point do a search in search engines like google it may help15. Is it true hello kitty is evil?I've heard & seen the history of hello kitty too, but I think it's stupid. I do not believe it & still buy & wear hello kitty products16. Is a Hello Kitty Diamond ring okay to propose with?Unless you are both 7, no I would not think a Hello Kitty ring would make for a suitable engagement ring--this is coming from a HK lover. The price is fine, the fact that it's a cartoon cat is not. Honestly, you think any 55 year old woman would want to wear a Hello Kitty ring? She would not . This ring should last her a lifetime, not until 6th period17. Why do we say hello ?I like they way they do it in Sweden. They announce their name. It's nice to know with whom you are speaking thus saving you from having to ask or guess. In Mexico they say "bueno". Yes, it means "well" or "good" but it can also mean "well" as in "well....?" so I am thinking that's why they say it that way in Mexico as if to say "well. ..go ahead, I am waiting to hear from you". In Argentina they say "Hola", hello, too. I sometimes answer the phone, "this is Adam!". LOL. mom always replies: "This is your mother!" So, I do it even more with my mom as I find it to plesantly irritate her!
How to Create a Traditional Housewarming Gift Basket
How Home Good Brands are Evolving to Engage Millennial HomeownersMillennials are widely known as the generation who prefers to rent rather than buy. Whether it's taking an Uber or Lyft instead of owning a car, or leasing a place rather than taking out a mortgage, millennials are approaching the concept of ownership in a markedly different way than their predecessors.But it's time to rethink that perception, at least when it comes to home ownership. More and more millennials are ditching the rent check in favor of a monthly mortgage payment. In fact, millennials now comprise 42% of all home buyers and 71% of first-time home buyersMillennials bring their own set of needs, preferences and expectations around home ownership, which creates challenges — and opportunities — for home goods brands. As such, I believe the next wave of major home goods brands will no longer be defined by the convenience or optionality they provide, but rather their ability to inspire and educate their customers. New types of homeownersLet's dive into how the market is changing with this new demographic of homeowners. Because millennials generally buy older homes that need fixing up, the vast majority (88%) are very interested in learning about home improvement and repair, and 86% have made at least one home improvement in the past year.But they often need help to get these projects across the finish line. In a recent survey, millennials had the least experience of any generation when it came to 13 of 21 common home repairs. Fixing the Wi-Fi router is one thing, but fixing the kitchen sink is a far more daunting task.It's clear millennials are buying homes and want to improve them, but many do not know how. They are in need of content and inspiration, but current offerings do not always offer this, leading them to go hunting for it. Those searches often lead to YouTube. Channels like HouseImprovements, which boast over half a million subscribers and over 100 million views, demonstrate the appetite for this content. But even with free content at their fingertips, studies show millennials still bring in professionals after using the videos to gauge to the complexity of the project and the need to hire someone. To appeal to these young homeowners, home goods brands need to hook them with a combination of inspirational and educational content. This will keep millennials coming back for more and create brand loyalty that drives repeat purchases and ultimately higher lifetime value.Why incumbents are not enough for millennialsLet's look at where incumbents in this space are falling short. The Home Depot built its business on being a one-stop shop for home improvement. It grew into the big-box retailer we know it as today because it provided anything and everything in one location. But it needs to do more to extend its impact beyond its stores and better educate and inspire its customers in the digital age. They have plenty of DIY videos on YouTube, although notably they have about half the number of subscribers as HouseImprovements. Additionally, classes they put on have a mixed reception, judging from online reviews.Direct-to-consumer (D2C) brands like Casper and Peloton have also relied on convenience as their main value proposition. Their frictionless offerings are particularly appealing to millennial renters, who just want to get what they need into their place as easily as possible. Taking a mattress out of a box or getting a gym-class workout from home certainly addresses that need.But in the age of one-click, same-day shipping, convenience has become table stakes. As more millennials become homeowners, they do not want to just make incremental improvements with easy-to-buy products, they want to change the build, function, and look of their homes.As a result, we are seeing a new wave of companies focus on providing inspirational content and full-service offerings around the home. These D2C brands like Houzz and Casper have huge penetration and are part of the broader group of over 400 DTC companies that have raised $3 billion since 2012. Where we are headedIf incumbents used convenience and optionality to become industry leaders, the next generation of home goods and e-commerce companies will focus on cultivating a community where everyone can learn, easily communicate with one another, share inspiration, and get help. At Signia, we are particularly looking at areas that lend themselves to content, such as indoor and outdoor gardening, growing your own food, home decor (art, furniture, etc.), and renovation (patios, bathrooms, etc. ). There are already a number of companies using this playbook to great success, which run the gamut across the home goods space. Block Renovation, which counts NEA and others as investors, is a platform for end-to-end home renovation services for bathrooms and kitchens. It assembles beautiful content like the shots below to drive interest. In the kitchen, Made In Cookware is a cookware startup that partners with celebrity chefs and creates both video and written content on how to cook, clean, and utilize their tools. Outside the home, innovators include The Sill, a gardening startup that provides content on how to pot, fertilize, and care for plants; Hometalk, a DIY home and garden knowledge hub centered on content and community, which raised $15M from NFX and others last year after bootstrapping for seven years; and Sunday, a lawn care subscription service, that invests heavily in its content hub called The Shed.While there is no shortage of headwinds going against millennials in their quest for home ownership, more and more are overcoming these challenges and buying a place to call their own. As this generation takes over the housing market, the home goods brands that cater to this group's insatiable need for inspiration and content will be well positioned for success.Written by: David
The Classics of Scandinavian Furniture Design
From its beginnings in the early 20th century, Scandinavian design’s streamlined style of modern furniture and decor has become even more popular today.The Scandinavian nations of Sweden, Finland, Norway, and especially Denmark are renowned for their modern living room furniture and interiors. Clean-lined and functional–yet taking on evocative shapes drawn from nature–Scandinavian design initially helped bring modernism to the masses by making it more humanistic. More than that, many classic Scandinavian works have proven to be timeless design icons.The BeginningsIn the early 20th century, the Industrial Revolution and Germany’s Bauhaus school inspired many European designers to create furnishings free of ornamentation, yielding a streamlined, machine-inspired functionalism. Scandinavian furniture designers put their own spin on the style, incorporating elements of their longstanding craftsmanship traditions, particularly light-colored woods.Finland’s Alvar Aalto, celebrated architect and modern furniture designer, helped pioneer the use of bending plywood in the mid-1930s. Many of his bent wood pieces are still in production today, such as the Stool 60, which recently celebrated its 80th anniversary, and perhaps the best-known of all his furniture pieces, the Paimio Chair, which was named for the town in which Aalto designed a hospital and all its furnishings.The 1940s and ’50sDuring and after World War II, a new generation of Scandinavian designers enjoyed increasing influence, and explored modern furniture designs that combined new materials and familiar natural forms. Finnish-born architect and industrial designer Eero Saarinen, for example, made his name in the United States while a student at the Cranbrook Academy of Art in Michigan. He co-designed a bent plywood chair with Charles Eames that won the Museum of Modern Art’s “Organic Design in Home Furnishings” competition in 1940.Saarinen would go on to design modern furniture classics like the Womb Chair in 1948 and the Tulip Chair in 1957, as well as architectural landmarks like the St. Louis Arch and the Trans World Airlines terminal at New York’s John F. Kennedy International Airport.It was also around this time that Denmark took the lead in Scandinavian design. Thanks to the success of numerous Danish designers like Arne Jacobsen and Hans Wegner, the phrase “Danish Modern” became shorthand for Scandinavian design (and middle-class sophistication). Like Aalto, Jacobsen was an architect and furniture designer. He not only created the elegant glass tower SAS Royal Hotel in Copenhagen, but also all of its interiors, including two chairs that became popular worldwide: the Egg and Swan Chairs.Hans Wegner also became one of the most prolific modern furniture designers. His Round Chair from 1949, sometimes known simply as “The Chair,” represented his philosophy of “continuous purification,” with a curving back rail swooping down to form armrests.Embracing new technologies and forms, Scandinavian designers like Poul Henningsen and Verner Panton adopted a more futuristic style, favoring extravagant geometric forms and bold colors. Henningsen’s PH Artichoke lamp, designed in 1958, may look like that petal-covered vegetable but does so for a practical reason: to distribute overhead light without glare. It has since become one of the most iconic works of modern lighting design.The 1960s and TodayWhile he started in the ’50s, Verner Panton really hit his stride in the non-conformist 1960s and ’70s. His look was all about improbable shapes, vibrant colors and exploring innovative manufacturing processes. Take his Heart Cone Chair, which forms a valentine shape from its oversized wings. And his S-shaped Panton Chair from 1967 became the first chair formed from one piece of molded plastic.Today, the popularity of Scandinavian furniture has reached every corner of the globe. Many of the classics discussed here are still in production–as well as new designs inspired by them–by brands like Vitra, Artek, and Knoll. Scandinavian style has spread to accessories as well, including things like pillows, wallpaper and other decor from Ferm Living, and streamlined kitchenware from brands like Stelton and Menu.It’s easy to see how, over the years, the appeal of Scandinavian design endures: warm modernism with a natural, human feel. That’s something we hope never goes out of style.Classic Modern Design: Scandinavian was ·RELATED QUESTIONWhere can I find good Classic Homes furniture?You can find good classic home furniture in both local as well as online stores. Since you have not mentioned your country or city of residence, it is hard for me to list down some local stores. So, I will suggest you some online stores.You can try IKEA. It is the leading online furniture storeswhich delivers internationally. You, however, will have to check if your country is included in their service area or not.If you are a resident of India, then you can try one of the online stores listed below.WoodenstreetIt is the first online custom furniture store in India which delivers in several parts of the country. This store is solely dedicated to home furniture items and hence you can find a huge variety of on their website. You can even pick you design, and if the design is practical enough to be transformed into furniture, they will do it for you. You can choose your type of wood, finish, fabric, etc. of course from the list of available options.PepperfryIt is one of the leading furniture stores in India that sells amazing home furniture. It has an extensive list of satisfied customers. Along with furniture, this store also has an excellent collection of home décor as well as hardware and electrical products.Fab FurnishIt is another leading online furniture store in India which now seems to lose its charm because of the poor quality of services and products. Although I haven’t shopped anything recently from this website, this is what customer reviews say about this company. You may or may not have a bad experience.
MY CAR IS MAKING A SOUND SIMILAR TO THAT OF A FLAT TIRE BUT I HAVE 4 BRAND NEW TIRES.?Check your wheel bearing. Also, does your steering wheel involuntarily turn to one direction when you are not directing it? Does your car swerve to one direction if you do not harness it? Could be the control arm failing, and it could be many more things. You should take it to a local wheel/tire shop and have them jack up the car to see if the wheels wobble while jacked up. If it wobbles, you need to replace your wheel bearing. If your wheel turns by itself while jacking up, you need to re-align or replace the control arm— — — — — —I have a flat tire on a car that I have not used much the past few months.?i would fix the flat - the other tires might get insecured if they feel you do not care about them— — — — — —When was the last time you had to repair a flat tire?Last summer I had a blowout.....!!— — — — — —Can a flat tire make you wreck?A tire with low pressure can make a car pull or drift in a direction. But I will not cause a violent jerk that will throw you off course. Only a blowout or a sudden deflation could do that. But always keep them to the specified PSI do not put the PSI that is indicated on the tire. That is the MAX PSI the tire should have— — — — — —Is there a saying that has Influenced your life?A bad attitude is like a flat tire, you are going nowhere until you change it— — — — — —What is the name of the tool needed to take a flat tire off my car?Hello there, first of all please look in your trunk for tools to remove your flat tire off your car. The tools should be with the spare tire. Failing that you will have to purchase a cross brace wrench, which will have four different sizes. Please note that for your own safety when raising a vehicle to change a flat tire, you must block or use safety stands under the vehicle. This is task you must have someone to show you how to do it. (that's if you are not sure) One more thing after changing the tire the wheel must be re-torqued after a say 100 kilometre run. Okay. Far as the tire shop loaning them out it's not a general practise for safety reasons of-course. Thanks.— — — — — —What to Carry in Your Bicycle Seat Bag in Case of a Flat TireI am an avid cyclist who has ridden 30,000 miles over the past seven years. I enjoy sharing the little I know with interested others. The Time to Prepare is Now Let's say you are out on your daily bike ride, looking for and successfully finding solitude. You are all alone, more than walking distance away from home, no cell phone signal (this happens a lot up here where I live on the Palouse), enjoying the fresh air, exercise, perspiration and isolation. Suddenly, your front wheel (or your back wheel) starts to feel different, less responsive, maybe even squishy beneath you. This is a telltale sign of a slow leak in your tire...and probably means that soon it will be completely flat. Right now-now, when you are sitting in your chair or at your computer reading this article and maybe have some time and inclination to do something about it-is when you need to think about the answer to this question: When your tire does go flat, and you are out there all alone, will you be ready to fix it? Are you prepared? Do you have what you need in your saddle bag, in your jersey pocket or on your bike? This very thing happened to me one day (slow leak, squishy handling, rapidly deflating front tire) and, though I truly thought I was prepared for that moment, I found out quickly I was not! I definitely made some rookie mistakes along the way, too, and I want to help you make sure you do not repeat them. The Right Tools for the Right Job When I ride my road bike, gravel bike or mountain bike, I almost always carry a saddle bag kit under my seat. It looks like this: On the day in question, I pulled off to the side of the road, opened up my seat kit pack and found this inside: a miniature patch repair kit (Skabs), tire levers, and a CO2 inflator with a spare CO2 canister. At this point, I thought I was probably going to be able to do what I needed to do to get rolling again. Indeed, in most situations this would have been enough. When I removed the tube from the front wheel of my bike, though, and began troubleshooting, I found trouble and then said, "Shoot." I was prepared for a lot of stuff, but I was not prepared for this: the tube was torn length-wise--like maybe 1" to 2" rips--in a couple different spots. When I discovered this, I started digging through my seat kit pack again, looking for a spare tube. That's when I discovered rookie mistake number one: I did not have a spare tube with me. Ugh. Sometimes You Have to Improvise Though I did not have a spare tube, I did have lots of Skabs on hand so I was able to jury-rig a fix to the problem by overlapping the little patch circles along the entire length of the rips in my tube. I did this in two places. Here's what one of them looked like: You might think that rookie mistake number two was putting the tube back on the wheel, trying to inflate it only to find that I did not actually get the tube fixed. Or, maybe you think I did not check the inside of the tire for protrusions, goat heads, small things that might re-puncture the tire. Well, those are not it. I actually did do both of those things (but not in that order) and when I went to check that the tire would hold air, that's when I discovered rookie mistake number two. I need to digress a bit here to set the stage for mistake number two. See, about six months prior to this incident, back when the world was normal and all, I put my bike in my truck and headed to a town south of here about 33 miles. I wanted to ride on the trail down there, and there's no way to ride a bike from here to there without braving a narrow, no-shoulder, two-lane US Highway. Braving would not be the right word for that either, actually. It would be more like stupiding if you were to attempt it. And now I've digressed too far... Anyway, while I was riding down there in the Lewiston, ID/Clarkston, WA area on the trail along the Snake River, I got a flat tire when I was about 12 miles away from where my truck was parked at Walmart. Long story short: I had everything I needed except a frame-mounted bike pump. My CO2 canister failed, I did not have a spare, and I also did not have a frame-mounted pump with me. That's when I started doing the walk of shame back toward Lewiston, pushing my injured bike down the road, looking at my feet, listening to the flat tire bump bump bump rhythmically round and round. See, I did not have cell phone coverage, either (remember I said that happens routinely up here on the Palouse?) so I also could not call my bride and tell her about my dilemma. Thankfully, mercifully, a man hauling a trailer, and who would been out camping with his young kids the night before, stopped alongside and offered me a ride. I took him up on it and vowed to buy myself a frame-mounted bike pump as soon as I got home. Which brings us back to our story: Before installing the tube back on the wheel, and not wanting to use my CO2 canister except in case of real dire emergency, I went to check whether the tube would hold air, using the frame-mounted pump I would purchased some five months before. That's when rookie mistake number two really hit home: that cheap pump I would purchased and mounted so nicely on my bike frame right next to the water bottle? Well, it did not work. At all. It did not push air out of the little hose thingy. It did not deliver the goods, as it were. So in the end, I had to use my CO2 canister to troubleshoot (shoot!) and also to inflate the tire. Preparation Is Key - Do It Today! Using the inflator, I was able to get enough air (CO2) into my front tire, and the patch-up job held long enough for me to make it back closer to civilization. Close enough to have cell phone signal, anyway, so I could call my wife and have her come pick me up. At the end of the day, that was plenty good enough. After my two rookie mistakes, I also learned a few things about my level of preparation, and I've since taken steps to correct them: I always carry a spare tube; I have a pump that actually works; and I look through all my saddle bags regularly to make sure I will have what I need when I need it out there on the road. If you are planning a long ride of your own someday soon, if the trail/road/mountain is calling your name and you plan to respond...there is no better time than right now to take inventory and make sure you have what you need. And if you do not , there is also no better time to get it. Once you do, you will definitely be ready for the next time your wheel starts to wobble and your tire starts to hiss. This content is accurate and true to the best of the author's knowledge and is not meant to substitute for formal and individualized advice from a qualified professional. Hi Liam - agreed. Tubeless is a great option for many folks. I do not have any of my bikes set up for tubeless, but I know those who do love the arrangement. I am considering it for my gravel bike. I also buy cheap tubes, and carrying more than one spare is an even better idea if you have capacity to do so. Thanks for stopping by, and have a great week! Tubeless is great on the mountain bike rather than the need for tubes- far better handling and performance. I tend to buy cheap tubes and take 2-3 with me. Getting patches to seal on dirty mtb inner tubes can be a challenge in itself. Kyler - thanks for the thoughtful comment. Yours sounds like a harrowing (and memorable) learning experience. I am glad all I had was a shredded tube and not a shredded face! Thanks for stopping by, and have a great week! When I was gifted my first mountain bike, we took it to an amateur trail that was quite long and I pulled my front hand brake and went right over the handlebars. Took off half my face and, unbeknownst to us, my dad's tire was swiftly deflating while we field-treated my face. His spare had a hole in it too! After walking about half a mile with my face bleeding, no water left, the ranger pulled up to us and gave us a lift. Thank goodness we were lucky enough to have the ranger pull up!
Mercedes-Benz Zetros
Mercedes-Benz ZetrosThe Mercedes-Benz Zetros is an off-road truck for extreme operations. It was first presented at the 2008 Eurosatory defence industry trade show in Paris. The Zetros is manufactured at the Mercedes-Benz plant in Wrth, Germany. The truck is designed to be compatible with the Hercules C-130 transport and also fits into a standard German railway carriage.— — — — — —Mercedes-Benz 770The Mercedes-Benz 770, also known as the Groer Mercedes (German for "Grand Mercedes"), was a large luxury car built by Mercedes-Benz from 1930 to 1943. It is probably best known from its use by high-ranking Nazi officials before and during World War II, including Adolf Hitler, Hermann Gring, Heinrich Himmler and Reinhard Heydrich, as captured in archival footage— — — — — —Mercedes-Benz SLS AMGThe SLS AMG Ambulance concept showcases the sports car as an emergency vehicle. Unveiled at the 2011 RETTmobil emergency vehicle expo, the concept retained the amenities of the standard car. The car was finished in ALU-BEAM silver metallic exterior colour with decals and emergency lights. It was not , however, revealed whether the car was fitted with specialised equipment.— — — — — —Mercedes-Benz S-Class (W221)The Mercedes-Benz W221 is a chassis code of S-Class, the successor of the Mercedes-Benz S-Class (W220) and the predecessor of the Mercedes-Benz S-Class (W222). The S-Class are the flagship vehicles of Mercedes-Benz and each generation typically introduces a range of technical innovations and developments that over time will find their way into smaller cars. The vehicle was unveiled at the 2005 Frankfurt Motor Show.— — — — — —2000 Mercedes-Benz CupThe 2000 Mercedes-Benz Cup was a men's tennis tournament played on outdoor hard courts at the Los Angeles Tennis Center in Los Angeles, California in the United States and was part of the International Series of the 2000 ATP Tour. The tournament ran from July 24 through July 30, 2000. Fourth-seeded Michael Chang won the singles title. .— — — — — —Mercedes-Benz W186The Mercedes-Benz W186 model 300 was a four-door luxury tourer produced by Mercedes-Benz between 1951 and 1957. The company's largest and most prestigious automobile, it was the S 600 of its day, elegant, powerful, exclusive, and expensive. Three versions were produced in succession, known informally as the 300a (or simply 300), 300b, and 300c. An enlarged "300d" variant built on the W189 chassis succeeded it in late 1957. Also referred to as a "Type 300", the W186 was equal in features and price but superior in performance to the rival Rolls-Royce Silver Cloud. Favored by statesmen and business leaders, it offered options such as a glass partition, VHF mobile telephone, and dictation machine. All but hand-built as the company flagship, the W186 is often identified as an Adenauer after Konrad Adenauer, the first Chancellor of the Federal Republic of Germany, who employed six custom cabriolet, hardtop saloon, and landaulet versions of the W186 and its successor W189 during his 1949-1963 tenure. Among the custom features in these "parade cars" were writing desks, sirens, curtains, dividing partitions, sunroofs, and half-roof "landaulet" configurations. Technologically advanced, the 300 was regarded as a "driver's" car, sharing numerous design innovations and mechanical components with the iconic Mercedes-Benz 300 SL "Gullwing", including engine, suspension, and chassis.— — — — — —Mercedes-Benz M273 engineThe Mercedes-Benz M273 engine is a V8 automobile piston engine family used in the 2000s (decade). It was based on the similar M272 V6 introduced in 2004. An evolution of the M113 V8, all M273s have aluminium engine blocks, sequential fuel injection, forged steel connecting rods, a one-piece cast camshaft, and a magnesium intake manifold. The cylinders are lined with silicon/aluminium, and a dual-length Variable Length Intake Manifold is fitted. In addition to this, new features shared with the M272 include DOHC aluminium cylinder heads, 4 valves per cylinder and independent continuously variable valve timing on both the intake and exhaust sides. A new electronically controlled cooling system has eliminated the need for a mechanical thermostat for improved engine warm-up and optimum control of engine temperature.— — — — — —Mercedes-Benz OM457 engineThe Mercedes Benz OM457 Engine is an 12.0 L (11,967 cc) displacement inline 6-cylinder 4-stroke Diesel engine. It is one of many motors in the 400 series of engines. The OM457 has many applications, including Truck, marine, military, municipal, and agricultural vehicles, as well as stationary settings. The engine has differing trim and power levels. The engine is water-cooled, and is produced using cast-iron cylinder block, with removable wet type cylinder liners. The engine utilizes diesel fuel delivered in a direct injection method from individual electronically controlled and camshaft actuated unit pumps. The cylinder heads are separate units for each cylinder. The crankshaft is a precision forged unit running in seven three-layer bearings, with counterweights bolted onto the crank webs, much like any other diesel motor of its vintage. The connecting rods are of a split design, with bronze bushings for the piston pin.
sin datos
Contact Us
Contact Person: AI customer service
Tel: +86 0757-23368757
Address: No.119, Shuiyin Road, Yuexiu District, Guangzhou 
WHATSAPP: 13885223350
Better Touch Better Business
Contact Sales at JuJiao.
Call Us
+86 0757-23368757
Copyright © 2021 FOSHAN SAN DUN Furniture CO., LTD. | All Rights Reserved |Sitemap