What New Applications Can 5g Bring Us in Two Or Three Years?

With 5g, everything can be connected to the Internet (IOT), bringing a better intelligent life. With 5g bandwidth, new technologies such as VR, AR, 4K and 8K can bring a better audio-visual experience for mankind. Really?

Manufacturers talk about 5g as the Savior of so many applications because the bandwidth becomes higher and these large traffic contents can be delivered in real time and quickly, then these applications will be very popular. But these beautiful visions can't be achieved at present. Is it because 4G bandwidth is not enough? Obviously not!

The main reason why the Internet of things is not popular is that the new value of Internet access is lower than the cost.

The main reason why VR and Ar are not popular is that the equipment is too expensive and there is no killer application.

The main reason why 4K and 8K are not popular is that the equipment is too expensive, there is no content, and users can not feel the image quality difference of resolutions above FHD.

If the above key factors are solved later, these applications will indeed use higher network bandwidth, but it is not necessarily mobile network bandwidth. At present, the network in many families has reached 100Mbps. Let these people be willing to watch VR and 8K on the sofa, and then think about why they want to do these things with 5g on the road.

So what's the significance of 5g in front of you? From the perspective of mobility, we look at two network classifications:

Mobile network: 4G is now widely used and 5g is highly expected. Its feature is wireless, and users can move for a long distance (more than several kilometers). It can be used indoors and outdoors. Mobile phone is a representative application. Generally speaking, the rate of 4G is 100Mbps, while the rate of 5g is 1Gbps. But that is in an ideal environment. Because the mobile environment is easily affected by shielding or distance, it is ideal to have a speed of 50% in general.

Fixed point network: simply speaking, it is the combination of Wi Fi and wired network to form a stable and high-speed network at fixed points (usually in buildings). In Taiwan, ordinary people can apply for 1Gbps optical fiber home, and there are even 10Gbps services in Japan, South Korea and Hong Kong. 1Gbps Wi Fi 5 has become very popular, and 10Gbps Wi Fi 6 has just begun to enter the market. In other words, it is not difficult for ordinary people to have a 1Gbps fixed-point network.

The significance of 5g is to increase the speed of the mobile network as fast as the fixed-point network, and it can serve a large number of online services at the same time.

Therefore, 5g can replace the fixed-point network, but the stability will be poor.

When the location is inconvenient to set up a fixed-point network, pay less attention to network stability, and 4G network speed is not enough, 5g is suitable for use. For example, if you hold a short-term activity in a place with 1000 participants and there is no ready-made fixed-point network, connect Wi Fi with 5g sharer and provide it to users.

Sounds weak and has nothing to do with ordinary people? Yes, that's why manufacturers have come up with VR, AR, 4K and 8K applications. It sounds awesome.

So 5g doesn't work for ordinary people? Not right. According to the network experience report of open signal, the average 4G network speed in Taiwan is about 30mbps, which is very sufficient, but it will not be enough in extreme situations. For example, when the bus is crowded during commuting hours, because the network is shared, a large number of people are crowded in a small area, and everyone's bandwidth will be too small to use or even connect.

That is, at present, 5g has only two meanings:

5g can be used where it is inconvenient to set up a fixed-point network and a high-speed network is required.

In the case of extreme congestion, it can provide good enough mobile network quality.

In the next year, 5g will be just like this. And then?

Let's take a look at the (Internet of things) IOT, VR, AR, 4K and 8K claimed by manufacturers.

First of all, it is unreasonable to watch 4K and 8K in a mobile environment, because in terms of the size of the mobile phone, the human eye can't distinguish the resolution above 1080p. 4K and 8K should be watched indoors with a large-size TV.

VR should be used indoors, because after wearing VR glasses, you can't see the external environment, so it's not necessary to use VR outdoors.

The above two categories must be used indoors, that is, it is reasonable to use a fixed-point network instead of 5g.

The Internet of things and Ar are left.

The Internet of things is a category, and the equipment is very changeable. Refrigerators, lights, meters, automobiles, industrial equipment... All can be called IOT. However, as mentioned earlier, 5g is not the first 1Gbps high-speed network, but a high-speed mobile network. Fixed point networks such as optical fiber Wi Fi should be used indoors, and its stability is much greater than 5g. In short, 5g should not be used for all long-term indoor iots.

What are the outdoor iots? Cars, traffic signals, surveillance cameras, etc. However, the car is not suitable for 5g, mainly because the penetration of 5g signal is poor. When the car shuttles in different places, the signal will be good and bad, and the stability is not ideal. It's better to use 4G.

Some network articles mentioned that 5g network latency is very small, which is suitable for the application of Internet of vehicles, which requires rapid response. This view is wrong. The latency of 4G is 0.05 seconds. In fact, it is fast enough. The biggest problem of mobile network is not latency, but stability. A signal instability is a Caton for several seconds. Moreover, due to the physical characteristics, 5g signal will be much less penetrating than 4G, which is easier to be unstable.

The outdoor fixed-point IOT is an appropriate scene for 5g. For example, the outdoor monitoring camera is very suitable for 5g because of its large flow and fixed-point. If it is confirmed that the signal at this point is good, the stability of the signal will not change. However, if you want to be a monitor camera manufacturer, you don't have to wait for 5g. Generally, the streaming video traffic of 1080p is about 3mbps. Now 4G is enough. You can start with 4G. After 4G is used more and more, and the allocated bandwidth is not enough, you can upgrade to 5g.

What about ar? In the long run, I think this is the new generation application that is most likely to use 5g, or "smart glasses" may be the revolutionary application that needs 5g most. This topic is more complicated. I will write a special article to discuss it later.

So what new applications can 5g bring us in two or three years?

Let's take a look at the comparison between network speed and applications to understand the bandwidth requirements of ordinary people.

It takes about 3mbps to watch 1080p streaming movies. The current 4G is doing well.

It takes about 100Mbps to watch 8K streaming movies.

The access speed of local hard disk is about 1Gbps. That is, when the network speed reaches 1Gbps, there is no difference in user experience between accessing cloud hard disk or local hard disk.

Blurring the experience gap between cloud hard disk and local hard disk is a qualitative change brought by 5g. Hereinafter referred to as "non inductive cloud hard disk".

This has several benefits:

The local end device can be lighter and save power, and can store an unlimited amount of data

100% of the data is in the cloud

In practical application scenarios, the effects are:

Different devices of the same user, whether mobile phones or computers, share 100% of the same data. Unlike most people who now use cloud hard drives, most of them put selected content in the cloud. When there are many devices and the selection criteria are not well thought out, the data will be lost and out of synchronization.

A further possibility is that the software no longer needs to be installed. Anyway, the speed of real-time download and installation is as fast as that already installed locally.

Further, since the cloud hard disk is as fast as the local hard disk, just move the operating system (OS) to the cloud! It means that as like as two peas, you can use the same OS to download the computer hardware from home, library, hotel and so on. You can get the same experience.

100% of the data of different users can be used by the same big brother (Google, Microsoft, Dropbox...). If the big brother gets more big data, more potential AI applications may appear.

Although some people will question whether this will have the problem of privacy, as now most people's emails are seen by Google, we feel very used to it. Historical facts tell us that consumers do not care so much about privacy as long as the benefits are large enough.

The second qualitative change brought about by 5g is that the local computer is no longer a computer, but plays the role of image player. Hereinafter referred to as "full-time cloud computing".

This means that the local computer on the user's hand (broadly speaking, including mobile phone, computer, smart TV, etc.) does not need to bear the work of computing, but transmits the user's operation signal to the cloud supercomputer, and then the cloud transmits the calculated picture back to the computer on the user's hand for broadcasting. Therefore, the local computer can do very well, As long as you are responsible for display and input, you can reduce the cost and volume, but have the performance experience of advanced computer / mobile phone.

Similar applications existed more than ten years ago, but they have not been popularized. For example, the "remote desktop" of windows is still used by professional engineers for professional purposes. "Cloud Games" is a hot field. OnLive has provided such services as early as 2010. Later, Yahoo, Sony, NVIDIA and Google's upcoming stadia all want to grab this big cake, but no one has succeeded.

In terms of "full-time cloud computing", 4G network speed has been able to provide a good experience. (source: IOT home network) but 5g can ensure that even if more people use these new applications later, there will be no traffic jam, improve market opportunities, give manufacturers more motivation to invest more resources to promote, and have more opportunities to form a popular ecosystem.

Finally, come to the conclusion:

5g will not bring any immediate breakthrough, but become a fixed-point network with poor stability. It is more reasonable to use outdoor fixed-point scenes, including outdoor fixed-point activities, outdoor surveillance cameras, etc.

The impact of 5g in the next two or three years is mainly to make products with mature technology but immature market more likely to succeed, including senseless cloud hard disk, full-time cloud computing, etc.

In the longer term, the future ar glasses or smart glasses, combined with 5g and AI, will have a revolutionary breakthrough comparable to that of smart phones.

sin datos
Artículos recomendados
Apple IPhone 9 Will Come with OLED Display As Per Rumors.
Apple IPhone 9 Will Come with OLED Display As Per Rumors.
Apple is all set to launch iPhone 7S and 7S Plus with rumoured iPhone 8 and now we have rumours of Apple iPhone 9, which is expected to launch in 2018.As per rumour Apple iPhone 9 will have 5.28 inch & the higher variant will have 6.46-inch display both are OLED display.The Apple iPhone 9 will be using Samsung,s OLED panels.Samsung has already sold 180 million units to Apple. There are rumours of Samsung is building a new plant for OLED panels specifically for Apple.This year Apple is all set to announce the three models of the iPhone with iPhone 7S & 7S Plus and iPhone 8. As of now, we have to wait and take this news with a pinch of salt. SourceTED QUESTIONWhy won't my PS3 display most of my pictures?Check to see if the Sharp is HD. If it is, go to the PS3 menu and change the HD output so that it matches what your TV is set to display (720p, 1080p, etc.) If this does not work, make sure you plugged the hdmi cable in firmly, and check to see if you are in the right mode on your TV (should be component)How to display a faceted-search menu where categories could contain just 1 or over 100 choices?I suggest the following rules for the check-box filters:download bmml source - Wireframes created with Balsamiq MockupsIn addition, following Steve Wortham's suggestion - display range facets as a double slider controller (eg. Ratings).I think this should give you a good start. Try this layout, test with 2-3 users and iterate.I have no tach or digital display mph ect on my GSXR 600 2009 nothing will light up on the display or tach?Ceck the fuse for the instrument panel, this is about the only thing that you can check without consulting a mechanic. Usually a blown fuse will cause this,and also if your panel is all digital then it is also possible the the circuit board can be bad,a very expensive fix might i add,,,,,,.,,,,,,,,,,,,,,,,,,,,,,,,,Unable to use laptop display since attaching monitorSo it looks like that Ubuntu on that Laptop is stuck in the external display modeMultiplexing 4-digit 7-segment display is flickeringTo avoid flickering of the segments, you really do need hard real time control of the multiplexing. Even small variations in the timing will be quite noticeable.Using the timer on the CPU should work quite well, but as you observed it seems a lot of hassle for one simple thing. Perhaps it's worth doing if it's not just a one-off thing you are making.Using a smart display, or making one by adding a small micro is probably the easier route. I would probably opt for the micro since it gives the most flexibility.How exacly do you display Physical passion?It is not something artificial that you can display at will. It should come from the inside, because of the chemistry and the actionIs there an app to display partition identifers?Another choice, installed by default on 12.04:There are options to display fields, remove headers, etc.may also be useful, depending upon what you find easier to parse. I do not think it will be easy to find a standard utility to convert to the grub nomenclature. The shell program /usr/lib/grub-legacy/update-grub has some shell script functions that do the conversionNeed help...Monitor, desktop display problem?Go to start button. Type are solution'. Click on adjust screen resolution. Make sure it's set to single scren display and your resolution is not more than you monitor can support. Try changing some of the settings. But what ever you do, do not set the resolution higher than what your screen can supportWindows 10: Laptop display refuses to turn offThe issue has been fixed in Windows 10 build 10586 released in November 2015. The display now turns off on its own when the machine is idleHow to disable Macbook Pro internal display when using external monitorsI use a very naive solution on a Macbook Air mid-2012: instead of using clamshell mode (closing the lid), I just press the brighness down button until the lowest level. For my surprise, the lowest level turns off the internal display. I do not know if this works for others models, but it works well for me.Flip the image of OLED 128x64 0.96 inch displaySSD1306 support display flipping (mirroring) - need only change in initialization: COMSCANDEC to COMSCANINC or vice verasa.More info in datasheet and section: 10.1.14 Set COM Output Scan Direction (C0h/C8h)Suitable low-power 10" graphical display optionsIt seems like your requirements have narrowed it down to a display type you already listed: e-ink. The others you mentioned all seem very experimental or in very specific applications.I do not know how many e-ink manufacturers there are, but "E Ink Corp. " has a 9. 7" prototype kit for sale (out of stock as of 2010 Nov 28). You might also be able to hack a Kindle DX (same 9.7" screen), not sure what is in themDo you think the Fundies would object if I put my atheism display up at the public school?All I have to say is if you do not want Christians to set up a display discussing the benefits and what not of religion then do not open the can of worms. People and their hypocritical ways are really starting to upset me. IF YOU DON'T LIKE THE WAY THIS COUNTRY IS THEN GET THE **** OUT!!!!Gateway 22" monitor brings up display for few seconds then display goes dark?Sounds like a bad back light.No fix for that,I hope you are under warrantydisplay a node in the sidebar region of another nodeI think you might have heard about Views module, you can create a views block to get the child node and display it on the same page using ViewsPrevent (or at least notify about) display names shorter than 3 charsWe no longer allow names of 2 characters.3 characters is the minimum name length, and this is enforced.However, users who have an existing 2 character name may retain it, but will be unable to copy their profile from site to site until they make their username at least 3 characters.Update: as of 14 September 2011, previously existing shorter display names have been padded with dots.How to display the last user logged in Windows 7 PRO x64 logontl;dr:Explanation:so after some googling and messing around I found (thanks to ) how it's "done"Thing is, Windows fails to build user list for LogonUI display if any of keys in HKLM/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProfileList do not have at least values with names: Flags, ProfileImagePath and State. Then it falls back to showing only Last logged on user and "Other users" button for manual enter of username.So, to cause this behavior, just add any subkey to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProfileList without any values and you are good. Remove to restore. I advise calling the new key some way it's clear why it's there and what it does.And of course, if you have this problem and want to restore user list, check all ProfileList subkeys and and remove ones do not have these 3 values (usual warning: handle registry carefully and backup before doing this of course, aside from accidental errors there are ways to hide user accounts from logon screen even if list can be read, so if you only have one user for example, and it's hidden using SpecialAccounts, you wo not be able to logon after restoring user list, because there wo not be any users!)Use an iMac 5k or iMac 4k 2017 as a target display with Macbook Pro retina early 2013According to this article on AppleInsider the 2017 4K and 5k iMacs do not support target display modeWhat is better to display the sub categories? Roll-over or click?I think its a better user experience to just display the top level/parent categories and then show sub navigation on those pages. It removes the clutter from the main navigation thus not presenting the visitor with 500 different sub level and sub sub level navigation.Of course, it depends on the store and the range of products. But another benefit is this also keeps authority in the most important/top level pages of your website rather than leaking this to so many other deeper category pagesIs it possible for Conky to display Time in words and not in numbers?Could not you create a symbol-font which consists of images of the written word for every numeral? Than you should just have to choose this font (if possible) for the display of timeI bought a used VCR: RCA VR603AHF (1995), and it has no digital display. Is this possible? No display at all? Or is something wrong with it?A lot of VCR's had nothing but transport control buttons, a volume knob (maybe) and a tape transport counter. Oh, and a tape release lever or button of some sort, occasionally. Winkie lights were not considered um, essential for playing a tape.Is there a way of saving a pic in my display images to my system? I accidentally deleted it.?hmmm, maybe you can use “Print Screen“ key when your open your “My display image...“ at YM screen and paste to mspaint then save as Jpeg fileWhat is the oddest thing youu2019ve put on display in your home?I use old wood pulleys and rope, skeleton keys hanging in clumps by the door and a Victorian counter ringer to call for dinner guests. Tiny mosquitoes made from fine wire and wings cut from plastic bottles are attached to the silk waterlilies I made. I adorned a set of built-in cabinet drawers with driftwood handles, in my main room. I have a collection of crystal balls usually on my rugs. They move around. Come to think of it, most of what I like is odd. u200dWhat is the oddest thing youu2019ve put on display in your home?.In find result window of Notepad, display multiple line resultsTry the following. Let's say your document starts with the word INFO and ends with 999.Your regex would be:In order for this to work with MULTI LINES, in the search window, right next to the tick for using Regular expression, there's a checkbox that says . matches newline. You need to have it selected for it to work. p. s. Checked that it works on my Notepad version 7.5.1p.s.2 The find only returns the 1st line of each occurrence. So if your match starts at line 5, but ends in line 10, it will display on the search window that it starts at line 5. You can not change that behavior in the applicationWhen should I use my display's native gamma over the standard 2.2?Setting display gamma to 2.2 or sRGB (in LCD OSD settings, that is) will make it closer to perceptually uniform (i.e. efficient for be used by human) and also make 8 bit images with gamma 2.2 or sRGB expose less banding (bigger colour depth) when viewed at 100%. However, there is a problem, at least with DisplayCAL: creating profile for gamma 2.2 means that 1D LUT will be created. This 1D LUT can be applied in two ways:Here comes the problem. Assume that you have an 8bit LCD which does not have gamma correction at all (or does not allow the gamma to be set enough closely to taget) and also does not use editable internal 1D LUT. If you calibrate your LCD for gamma 2. 2 the DisplayCAL will make your LCD loose colour depth because it does not offer any interactive gamma adjustment. Therefore your LCD wo not even be 8bit anymore (more like 7,5bit, for example).If your entire workflow is 16bit there is zero sense in creating 1D LUT. However, since most LCDs have extra contrast, you may set your LCD gamma to compensate for it BEFORE profiling and then create profile for gamma "As measured".Creating 1D LUT for video card (8bit to 8bit) will only cut your colour depth
LCD Industry Touch LCD Screen Slow Response How to Do, What Treatment
LCD Industry Touch LCD Screen Slow Response How to Do, What Treatment
With the development of science and technology, LCD touch-screen can be seen everywhere, especially in industrial production. Then, LCD industrial touch LCD screen occasionally has some faults, such as touch insensitivity, so what causes this phenomenon? Xiaobian came to solve our doubts.If the touch screen on the industrial touch surface reacts slowly, it may be that the touch screen system is old, the internal clock frequency is too low, or there are water droplets on the touch screen surface and it cannot be moved. In order to restore the touch screen to rapid response, the system driver must be replaced or upgraded, or the touch screen surface must be wiped with a rag. In general, this is common for multi touch screens, but care should be taken to maintain them. In the detailed operation and use, the following problems must also be paid attention to:1. TP is a glass product. Please handle it with care to avoid damage and rupture.2. The contact surface of TP is a conductive film. If the protective film is torn off, it is forbidden to contact the product surface with sharp objects such as nails, pencils and so on, so as to avoid soiling and scratching the product.3. Do not stick oil, water and other liquids on the surface of the product.4. When there are stains on the touch surface, please gently touch the alcohol with a degreasing cotton ball or dust-free cloth, and gently wipe the product surface. Do not infiltrate the alcohol into the product.5. Avoid the use and preservation of organic solvents or corrosive gases (acid gases, etc.).6. When installing the machine, please use non corrosive glue to fix the product.7. When installing the machine, please wear fingertips or gloves to ensure the cleanliness of the product.8. When TP is found to be ineffective, please check whether there is faulty welding, whether the pin contact is good, whether the machine is installed correctly and whether the operation touch position is accurate. If there is no such problem, please stick the protective film back to the product surface to ensure that the product is returned to the manufacturer for analysis and treatment.9. After unpacking inspection, keep the original package sealed and stored to prevent the product from being affected by high temperature and high humidity, resulting in watermark on the glass surface of the product.The above content is the problem of slow response of LCD industrial touch LCD screen. Doing these protective measures well and protecting the touch screen as much as possible can delay its service life and avoid slow response.fqj
I Need to Lose Wight Before My Boyfriend Comes Home! HELP ME?!?
I Need to Lose Wight Before My Boyfriend Comes Home! HELP ME?!?
Do the yogurt and fruit thing for dinner. Have a big breakfast. Reason is your metabolism goes down at night so you can sleep so what you eat in the evening stays better than what you eat in the morning. Also tuna is not vegetarian.1. DRY AIR IN MY HOME...help!!!!!!!!?dry air in florida?? without using a humidifer? maybe you should check with a dermatologist2. Parvo best way at home HELP!?They need a vet and need to be under 247 vet care or they will DIE. Its not that hard to understand Never,ever force anything down a parvo puppies throat. They will only throw it up or it will just come out the back end. The virus causes the lining of the intensives to slough off so they can not adsorb anything. Forcing things down their throats will only make it worse " I can afford to feed my dogs but I cant afford a vet bill for two dogs " The surrender them or have them humanly put down you waste of skin. There are NO home remedies, your so called research utter BS and you just do not care enough about the dogs to surrender them or have the treated so you rather allow them to suffer a slow horrible death Any one who claims parvo dogs survive just off pedilyte is a lair Since you do not care enough about the puppies to have them treated then surrender them so they can be humanly put down3. Baby Wont Sleep Unless Home...HELP?congratulations for your new child. I actually have a two week historical son, it is robust is not it? Something I did for my son was once lifted up the matress on his bassinett and placed a blanket beneath it to hold him extra upright. I did not do that given that he was not sound asleep in it, I did it given that he's having a predicament with a few publish nasal drip and I was once hoping to avert a few of it from happening his throat, however it sort of feels to be running quality so far as him sound asleep greater too. He too likes to be held while he's sound asleep however propping up his matress and giving him an incline turns out to fulfill him. Something else you would wish to provide a check out if you have not already. Before mattress time provide him a first-class hot tub utilizing the Johnson and Johnson bedtime tub merchandise. When I did this with my son, he was once out like a mild for like three a million/two hours. Good good fortune to you! p. s. one other proposal. ... at my child bathe I bought this endure that whilst you flip it on it makes "womb sounds" that possibly a well funding to place for your child's bassinett and perhaps it is going to make him believe extra comfortable like while he was once for your stomach. Also, studying different persons's responses... the swaddling is a well concept as good!.4. What are some easy things I cand do at home to help out the environment?get rid of ....car, microwave, t.v., lights, aerosol's, plastics and everything that is not biodegradable5. How do I make my indoor cats outdoor cats at a new home? HELP!?gradually introduce them to the outdoors. hold them in your arms while outside so they can see how wonderful it is outside. then, after about 10 minutes of holding, you go back inside and feed them a special treat they like, so they know that the outside is a fun place to be, but they always come home to get all of the love and attention you provide for them. after a few times of this, use a cat harness (available at petsmart) and let your cat feel the ground under its paws. once again, after like 10 minutes, bring her back inside and show her why she does not want to run away (by showing her that you provide love and attention). then, after you are confident with that, let her off the harness, BUT STAY VERY CLOSE! this will show her that she has freedom, but also that you have a wonderful home for her. cats are very loyal, so if you do this gradually, she will always come back. cats are loyal. i heard a story from Hurricane KAtrina that said this man had to leave his 3 cats behind. the floodwater came up pretty high, and the poor man was worried about his cats. once he returned, he found 2 of his cats rescued by an animal shelter. he found his 3rd one under his bed at home, waiting for his return. if the worst thing happens, and they scatter, do not panic. they are probably hiding in the bushes near your house. mines did that one time. lol. also, check to see if cats in your area have been disappearing. my neighborhood has suffered from a series of bobcat/coyote attacks on our local cat population, so our cats come in before dark. i would pay attention to these numbers before letting them live outside. wish you the best of luck!
Top Ten Conjectures of 2012 American Consumer Electronics Show (ces2012)
Top Ten Conjectures of 2012 American Consumer Electronics Show (ces2012)
According to foreign media reports, when the world's largest science and technology exhibition is about to open, through ten guesses about the exhibition, maybe readers can infer the new science and technology products that will appear in the exhibition.1. Super book boomHas the super instinct reached 50 this year? There are rumors that Intel's new products are one of them.2. Tablet with Tegra 3 quad core processorAsus's Transformer prime tablet has been launched. It is certain that more tablets of the same type will come out in the near future.3. Smartphone with built-in quad core processorThe difference in screen size between smartphones and tablets has been shrinking. With the birth of smartphones such as HTC edge, the difference between the two will be even smaller.4. Naked 3D TVAlthough a few 3D TVs have been launched, 2012 may be the year of rapid development of 3D TVs. People don't have to be like buddy? Holly wore heavy glasses and 3D glasses to enjoy 3D TV programs.5. The next generation new host xbox720 supporting the second generation Kinect somatosensory peripheralsAlthough Microsoft has tried to break this rumor, the sign that it may launch a next-generation new host has made players have unlimited imagination.6. Nokia Windows 8 tabletEven now Nokia has officially reached a partnership with Microsoft, is it really ready to shift from mobile phone production to tablet computer production?7. Intel will launch mobile phonesAlthough we don't have great expectations for this rumor, we can't rule out that Intel will choose to launch its own mobile phone products in 2012.8. AMD's chip will be lighter and thinnerAlthough they can't be described as super original, will ADM's new products bring a heavy blow to the high-end notebook market?9. Consumer 3D scanning equipmentThere are rumors that Samsung may display a 3D scanning device on the market.10. 3D printing press with mass marketThe thing-o-matic 3D printer produced by American makerbot company is very powerful. 2012 may be a booming year for household product manufacturing for every customer.
Machine Needs F1 Key to Reboot, How to Skip This?
Machine Needs F1 Key to Reboot, How to Skip This?
This has nothing to do with the operating system. It's a BIOS thing.You need to enter BIOS just when you power up the computer with one of the following keys:DEL F2 F9 F10 F11 F12 depends on BIOS type, you should be shown the key that enters Setup during POSTThen go into the basic settings and change the setting for keyboard errors• Related QuestionsTerminal has no option to open new tab and no label in tabsEncounter the same issue after upgrade from 14.04 to 16.04. It took me sometime to find the "preference" window as the solution mentioned above in Ubuntu 16.04. In case some other people have the same issue, I share the way to find the preference window.You can find the preferences by: open a terminal, at the terminal right top are the hidden tabs -> terminal ->Preferences------how to simulate FX forwardsIf I understand correctly, you want to calculate the present value of some FX Forward contracts. The only part of the value I can see which could require any MC would be looking at the XVA components, which is much less about the forward and much more about the counterparty & collateralisation.If you just want to value some vanilla FX Forwards, don't do MC.------character and camera not moving in the same speedMaybe it is a point of view opinion but it seems you should use another approach : Good tools for that is :Making your cam position relative to a transform :this should already make your code easyer to maintain and it could allow you to switch between targets painlesslyEDIT:And to stress it even more as Byte56 stated : Get rid of all the useless stuff------Call fieldset multiple timesFor anyone else that stumbles on this. I found a solution. So remember my example is "How Many Players" i used select option 1-5. If user selects 1, fieldset 1 appears only, if he/she selects 2, FS1 and FS2 appear, select 3, FS1, FS2 and FS3 appear. To prevent the error I use and or statement for allow the fieldset and worked my down down. See image.------How to find the components of a perpendicular vectorYou have $$-n_13n_20$$ $$n_1-5n_22n_30$$Choose one of the three variables freely (but not zero) and solve the remaining system.It can happen that the remaining system does not have a unique solution (not the case here, no matter which variable you choose).Bue even this is no problem because in this case you can choose a second variable freely (even $0$).------How to get a data attribute inside an option of lightning:select componentYou can't get to it, at least not the way your code is written. Regardless, this still seems a lot more complicated than it should be. Here's a more practical version:Here, we just get the list back out, find the record we want, and, if one was selected (as opposed to none), we now have all the information we need from the record.------Shower stall kit around $300 but isnt made of cheap components?All shower kits are made of cheap materials that is why you find them in low end houses. Your best bet and it would cost no more than $300 is ceramic tile. It's actually easier to install than a surround especially in older houses where the walls aren't plumb. Do a little web research and ask some questions on how to do it------What is the purpose of a microcontroller bootloader? duplicateJust to also give a hobbyist's perspective:It makes life much easier in not requiring any additional hardware or much low-level knowledge. One extreme example I used was the particle photon (no affiliation) which can get flashed over the cloud. The only things required to flash this chip are:It makes the process rather inexpensive and is actually quite simple from a non-pro perspective.------Looking for a 1 to 1.5 mm pitch board to wire connector that locksYour best bet is to do a parametric search on one of the large suppliers sites. Here is an example search on Farnell that returns 2000 results for wire to board between 1mm and 1.5mm. You can narrow it down as necessary (e.g. contact number, orientation, etc)When you find a suitable part you can search for it elsewhere by product number if necessary.------Receive raspberry stream in C#It seems like you have already nailed the RPi part of the issue, and is only missing the windows component.As with your netcat setup, you need to create a listening socket in C#: suggest you try to ask for implementation details on stackoverflow, as this problem is highly relevant there and you will get some really good answers.------Export and import content from one drupal site to another?The Migrate module can migrate anything you want from the most databases.Depending on how your content is put together this might be relevant for you.Links:Also be sure to look into the Migrate module folder. It contains a Beer.inc file, which is an example of how you can do simple mappings. For more complicated migrations you can look into Wine.inc------PageObjects: Aggregation/Composition vs Inheritance for nested componentsI'm using the inherited based design. It worked great until the application I'm testing was also made available in another, more limited customer-facing UI. So now I have two applications which consist of the same components surrounded by different menus. That's a situation where the inherited design breaks.An aggregation-based design combined with some IOC container could be a lot more flexible, I guess------How to solve vector equations?The question has part of in application of calculus in physics. Ypu need to verify $curl vec F 0$ to determine if there exists $phi$ such that $F nabla phi$. $phi$ is called potential in physicsOnce you confirm there exisrs a $phi$, you can try to integrate partially and combine three to get $phi$I believe $curl vec F ne 0$, so there is no potential.------Expressing position due to gravitational acceleration as a 3-Dimensional differential equationThe easiest thing to do is to start from the gravitational potential$$phi-fracGm_1m_2sqrtx^2y^2z^2$$and use $vec F-vecnabla phi$, or in components:$$F_x-fracpartial phipartial x-fracGm_1m_2,x(x^2y^2z^2)^3/2 m_2 A_x m_2 fracd^2 xdt^2$$with a similar approach for your other components.------syllogism package new counterThere's no need to use a new counter (would be difficult, perhaps)I used another approach, replacing the list in @sylloc command with a special sylloglist which is a clone of enumerate, which provides the counter anyway.The 3rd item is a rule, I have to replace item ... with item there.The list spacing settings have been incorporated into the optional argument of sylloglist.------How to change the html of threaded comments?Could you give a little more info on what you are trying to do?If you want to add your view for displaying comments to a specific thread, please take a look at using panel from contrib ( module allows you to add views (and other components as well) to specific pages, other panels (when using mini panels) etc------Slope of tangent in $(x,y)$ on a circle $K(x,y)inmathbbR^2|x^2y^2r^2$ with initial conditions$r$ is indeed constant (otherwise $K$ wouldn't be a circle)It doesn't matter if separate constants of integration are included on both sides. (Two arbitrary constants can simply be combined: $c_1 c_2$ is still just a constant).$c2$ and $c5$ come from the initial values: $y(1) 1$ and $y(-1) 2$, respectively. In the first case $x1$, $y1$ which gives $c2$. Similarly for the second case------Would a triangle wave have finite or infinite sinusoidal components?a triangle wave is continuousQuote from here: -The triangle wave has no discontinuous jumps, but the slope changes discontinuously twice per cycleHaving the slope change discontinuously also means an infinite range of sinusoidal components.For instance, if you time integrated a square wave you produce a triangle wave but, all the hamonics of the original square wave are still present after the time integration: -------How do I explain to a team that the project they will work on for six months will certainly be cancelled?If the company is making a mark-up of 200%, one way to motivate your developers is to offer them some of that, surely? Say, an extra month's pay on acceptance of the sham product if (as expected) it gets cancelled after six months. You could even give them the option not to participate in the work, but I doubt that there would be many takers------Decomposing quasi-finite separated group schemesAt OP's suggestion, I am moving my comment to an answer. In the original question $U$ was the spectrum of a Henselian DVR $R$ with $K mathrmFrac(R)$.Define $G_1$ to be the union of those connected components of $G$ whose images cover $U$. Then use EGA $textIV_4$, 18.5.11 c) to verify that $G_1$ is a clopen $U$-finite subgroup scheme of $G$------How are files opened in unix?Generally you should read a book like this one to get answers for most such details inside kernel. But, in general, yes, the process is that:Details of directory search for this are very specific for particular VFS. It can be of any kind including memory-only ones (tmpfs), disk-based ones (ext4, etc.), but the common concept of hierarchy of directories is kept in effect------How to make the HT12E transmit (TE to low) only when one or both buttons are pressed?It may be easier than you think; if you look at the data sheet more closely: -So, any button being activated will automatically pull TE low and enable transmission and, in the case when buttons are released (thus deactivating TE), this diagram tells you that the device will continue to transmit the four byte message and thus inform the receiver that buttons are deactivated: -------how to post data of a form to an iframe in lightning component?The browser's same-origin policy prevents a page from accessing content or code in another page loaded from a different origin (protocol port host).You can use postMessage() to communicate between your Lightning Component and the content of the iframe. See this blog post for details.In Spring17, you can also use the Lightning Container Component, but be aware that it is in Developer Preview.------Need sorting method for coordinated, flattenned collection closedThis is not just a sorting problem. You are also updating the YOffset values based on the sorting. So assume the input data is valid(i.e. no missing offsets, consistent type of Value property). Here is the code:Source data:LINQ:Verify the result:The output:Note: I kept sortedByFirstColumn as IEnumerable and unordered, but adjust it the way how your application requires.------Defining real powor of linear operatorThis is impossible. Consider $Vmathbb R$ and $Tx-x$. A linear $T^frac 1 2$ would satisfy $T^frac 1 2T^frac 1 2 x -x$. All linear operators on $mathbb R$ are of the form $Ax cx$ for some $cinmathbb R$. Thus, assuming $T^frac 1 2 x cx$, we get $c^2 x-x$. For $x1$ this gives $c^2-1$ which has no solution in $mathbb R$------Why does water reflect light?EM wave consists of electric and magnetic component. Electric field is responsible for reflection. When EM wave hits the water surface electric component turn molecules of water (H2O is a dipole) Next moment water molecules want to go back in initial position. So they turn back and thus so many molecules at the same time re-emit new EM wave in the opposite direction------Basic tension and equilibrium confusionThe object is not in equilibrium. However, you can still calculate $F$. You know that the string isn't lengthening or shortening, so the net force in the direction of the string is zero.So you can decompose the three forces in the problem into components along the string and components perpendicular to the string, and set the net force along the string to zero------Is there any scrappable junk I should hold on to that could otherwise be used for other purposes?Over due library books can be returned at a library in exchange for book return tokens, you can trade in the tokens for misc items like a camera or toys, and if you have enough you can get a Surgical Magazine.I haven't figured out if subway tokens have anything similar yet so for the time being I've just been holding on to them------Find the coordinates for $v$ in the subspace $W$ spanned by the following vectors:Basically what @PrahLad said, $v a_1u_1 a_2u_2 a_3u_3$ So since $u_1,u_2,u_3$ are orthogonal you can use the formula $a fracy cdot uu cdot u$ or in your case: $alpha fracv cdot u_iu_icdot u_i$So the first one for example will be $fracv cdot u_1u_1 cdot u_1 $ (your calculation here)------What is the purpose of marking the positive terminal of an 50% duty cycle oscillating source?It is just common practice. In reality there is no need, but people like reference points, and things that feel familiar to them. People who have a lot of experience with electronics know that there is almost always a positive and a negative end (even if it is arbitrary and does not matter). Putting a is just a way to make people feel comfortable.
Siemens Is Considering Using Blockchain to Improve the Car Sharing Market
Siemens Is Considering Using Blockchain to Improve the Car Sharing Market
With the emergence of bitcoin, a new secure value transfer method has emerged through its underlying technology blockchain. Since the birth of bitcoin 10 years ago, a large number of mainstream entities have studied various ways to guide the potential of blockchain. Automation giant Siemens is evaluating technologies for various enterprise use cases, including improving the car sharing market.Siemens is following the trend of mainstream giants seeking to integrate blockchains. "We are developing industrial expansion products of blockchain system," Andreas kind, technical director of network security of Siemens, told me in an interview. The use cases mentioned above are related to supply chain, mobility, manufacturing and other fields.Kind explained that when entities are interested in moving towards blockchain, they usually have to go through a period of testing and discovery before they can choose the most effective and applicable use cases. "Siemens is at this stage," he added. Kind said that the company has just completed a period of exploration. "Now we have really entered a set of use cases related to Siemens business." Kind pointed out that Siemens especially wants to obtain the use license of blockchain.Blockchain in the mobile fieldThe director of network security and blockchain mentioned that the mobile field is one of the key applications of Siemens blockchain. Siemens has a separate branch in the mobile field. Siemens mobility, a subsidiary of Siemens AG in Germany, stated on its website that the company is committed to providing "transportation solutions" and integrating "people and goods" Shipped all over the world.Car sharing as an optionKind explained that people living or working in larger urban areas often rely on carpooling rather than undertaking some responsibilities related to owning a car, such as parking, car payment and insurance. According to the details on the enterprise carshare website, carpooling service allows users to rent a car at any time, even as short as an hour. Zipcar is another example of car sharing operation Son.This is a huge change. So in the future, there will be more opportunities around mobile services, not just selling a car. You have seen it in the context of car sharing. People want to go from point a to point B, rather than owning a car and moving, because sometimes it is much more convenient than owning their own car.As king specifically mentioned the "gas card", carpooling does have its difficulties. King said that in the car sharing subscription service, "you don't have to worry about paying parking fees or refueling your car, so all fees are included."However, kind said that sometimes customers may need to refuel their cars. Finding a suitable gas station may be difficult because customers need to refuel at specific gas stations, which cooperate with companies sharing their cars. When customers find a place to refuel, they must use a gas card and attach the relevant personal identification number (PIN) with detailed instructions.Kind pointed out: "this is not only inconvenient for drivers, but also inconvenient for companies, because gas cards will be stolen and sold on the Internet." he explained: "in an industrial environment, you need something, a technology that can bring together different participants who (do not) fully trust each other." "this is where blockchain can add value."Car sharing and blockchainKing explained that sharing cars is an area where Siemens is considering integrating the blockchain. "In this area, blockchain provides a more frictionless way of transaction." he added: "transactions can be car delivery or (simple) carpooling." king also noted many interacting groups, such as brokers, organizations owning cars "Garage provider" and so on. Kind said: "all this should be completely seamless in the process of transaction. Blockchain is indeed a correct technology."At Bosch's 2019 connected world conference, a representative of Siemens explained to me in an email that Siemens's enterprise technical team introduced in detail the concept of "Intelligent Parking Based on blockchain" as a possibility of using blockchain.
Pretty and Cool Halloween Witch Or Dark Fairy Costume Ideas for a 11 Year Old Girl?
Pretty and Cool Halloween Witch Or Dark Fairy Costume Ideas for a 11 Year Old Girl?
Hi there Here is an article I wrote recently when I was asked a similar question. I hope you find it useful. When it comes to girls, there are some standard costumes that you will see year after year at Halloween time. With many of them, they wear the costume year round in creative play. Birthday parties year round are starting to have "theme" costumes, as well, and many of these will fit with those beautifully. Princess - The Disney Princesses are the most popular. With gorgeous dresses that go with Belle, Sleeping Beauty, Cinderella, Snow White and Jasmine, you will surely find one that fits your child and that they will enjoy. Most toy stores carry these costumes year round, so you can find them on sale and stock up for future Halloweens. Ballerina - A very simple costume of a leotard and a tutu. Best used in warmer climates, as Halloween night can get chilly in some areas. I've found that these costumes often come with wings, making the costume more along the lines of a "Fairy Ballerina". Blue from Blue's Clues - no matter what you may think, Blue and Magenta are both girls. Most children know this! Blue can sometimes be worn on little boys, though, and Magenta is quite popular with the girls. Dora the Explorer - What an easy costume to either purchase or make yourself! With a simple pink t-shirt, red shorts, yellow socks and white tennis shoes, you have the costume pretty much complete. Add a purple backpack and some jewelry you find at a dollar store and you little girl can be Dora all year long. Various Animals and Bugs - Little girls love dressing as animals. At Halloween time, black cats and bunnies are popular. Bugs like bumblebees, ladybugs and butterflies are also everywhere! These costumes can be bigger and bulkier than some, so make sure to take into account how heavy it is and how far you are expecting your child to walk. My best advice when costuming your child at Halloween is let them choose what they want. Do not make big plans and create a costume, only to turn around and see they want to buy something "cool" from the store. They are not going to have fun in a costume you force them to wear, which will ultimately ruin your night, too1. how much money should a child get from the tooth fairy for their teeth?i used 2 get a dollar a tooth then i would get a candy bar or soda from the gas station with it so maby 1-2 dollars2. Why we rarely see magic circle during battle in Fairy Tail : Final Series?I found this reddit post from 4 years ago that addresses this issue. Relevant comments from the thread:That might also be the reason why you feel the fights ended more quickly3. If you could do whatever you want with a fairy tale village, what would you do?that sounds like a very fun place to live, you need to add a well of spirits though, you know a central magical area :)4. Are fairy's real? if so, have you ever seen one?Fairies are real but i doubt many people have seen them. They like to stay away from humans i guess5. WHAT AM I??? AM I A VAMPIRE, fairy, mermaid ect...?...Yet another little girl who's read cursed Twilight one to many times. But anyway, none of the things you mentioned are criteria for being any kind fictional creature.6. What colour is Levy McGarden's guild tattoo in Fairy Tail?I think it's white. They show it during the tenrou arc when she goes to get help for Gajeel. And yes it's on the back of her left shoulder blade7. Why will Fairy Tail have 4 consecutive weeks of double chapters?I think this is mainly a marketing tactic, meant to attract more readers to buy copies of the Weekly Shonen Magazine1. When the magazine's copies hit the bookstore, a front cover caption Fairy Tail! Double Chapter inside!! ... and next 3 weeks too!!! (or something on those lines) will draw the buyer's attention, and would likely lead to an increase in sales. Regular readers would buy the magazine no matter what, but the tactic is mainly aimed at two categories of prospective buyers:People are made to believe that they are getting something "extra", which often leads to making a buy decision. This, by the way, is not much different from the "Buy One, Get One Free" offers. It is also quite common for popular TV shows to have "2-hour specials" every once in a while, which is also based on the same "principle" (if you will). Moreover, announcing 4 consecutive editions with double chapters increases likelihood of repeat business. People look forward to buying the next 3 issues as well. Buying 4 consecutive issues will lead to at least a sizeable number of readers "latch on" to the magazine, who would naturally choose to continue buying later issues as well. As for why Fairy Tail gets double chapters so often (as against other mangas), I think it mostly comes down to "because he is Erza Mashima!!" To elaborate, Mashima (and his assistants?) are able to spend more time and/or effort on their manga and can submit two chapters in a week, whereas most other mangakas may not be able to do so due to personal commitments or other reasons. As an aside, he published triple chapters of Fairy Tail for two consecutive weeks a year or so ago. (Chapters 338-340 and 341-343, IIRC)1 Weekly Shonen Magazine is different from Weekly Shonen Jump.
What Should My Sister Put on Her Wedding Registry?
What Should My Sister Put on Her Wedding Registry?
We have all the standard stuff that you need for a house too. I've already owned 3 houses and have moved into a bigger house every time I buy a new one so of course, I have enough stuff. She had her own apartment for the last 3 years. However, she decided she wanted all new stuff so that's what we asked for on the registries. Towels, sheets, comforter, mattress cover, dishes, cutlery, appliances, etc. We had a few nontraditional items on the registry too. Dog bed for our dog (purchased), a new gas grill (yes, somebody bought it), a motorized cooler on wheels (got that too!), a microwave (got it) and stuff like that. Those are just some ideas you can registered for. Go shopping in these stores that have registries and just pick out stuff you want. That's what we did.1. maintenance schedule tracking softwareYou mention Strava: they do that for you. If you register components and parts of your bike like a chain it will show the mileage from the registering date. It might a bit problematic if you have two sets of wheels (like one for rain and another for sunny days)that you use alternatively2. How many wheels are on a boat?Depends on your definition of a wheel and what kind of boat.By the most common definition, there are no wheels on my sailboat. But you could call a "block" with a rotating pulley in it a wheel. This would bring the sailboat up to 12 wheels.If you mean "steering wheels" or the wheel for the helm, again my sailboat has none. It uses a tiller. Some sailboats have just one wheel for the helm. Some of the large sailing vessels had many, because the power needed to hold the helm was far more than one person could exert and power steering did not exist.3. Road Shape for Square WheelsLet Choose a coordinate system so that $Q$ is constrained to move on the line $y=0$. This means $y_Q = 0$ identically.Parameterize $P$ by arc-length $s$. We will assume the wheel is rolling from left to right without sliding. Furthermore, at $s = 0$, $Q$ is located at origin and lies directly above $P$. More precisely,$$(x_Q(0), y_Q(0)) = 0,quadtext and quad begincases ( x_P(0), y_P(0) ) = (0,-b) ( x'_P(0),y'_P(0)) = (1,0) endcases$$After we roll the wheel for a distance $s$, $P$ moved to $(x_P(s), y_P(s))$. The tangent vector and upward normal vector of the bump at that point equals to $t = (x'_P(s),y'_P(s))$ and $n = (-y'_P(s), x'_P(s))$. Since the wheel is rolling without sliding with respect to the bump. One can reach $Q$ from $P$ by a move along direction $n$ for a distance $b$ followed by a move along direction $-t$ for distance $s$. This leads to following ODE$$0 = y_Q(s) = y_P(s) - s y'_P(s) b x'_P(s)$$Together with the constraint $x'_P(s)^2 y_P'(s)^2 = 1$ and given initial conditions, one find:$$ begincases x_P(s) = bsinh^-1fracsb y_P(s) = -sqrts^2b^2 endcases quad iff quad begincases x_P(s) = bt y_P(s) = -bcosh t endcases quadtext where quad t = sinh^-1fracsb $$ Let $t_0 = sinh^-1(1) = log(1sqrt2)$. The two endpoints of the bump corresponds to $s = pm b iff t = pm t_0$. At those points, $y_P(s)$ reaches its lowest value $-sqrt2b$. The area under the bump (but above this $y$) is given by the formula:$$beginalignint_-b^b (y_P(s)sqrt2b)x'_P(s) ds &= b^2 int_-t_0^t_0 (sqrt2 - cosh t) dt = 2b^2 left(sqrt2t_0 - sinh t_0ight) &= fraca^22 left(sqrt2log(1sqrt2) - 1ight) endalign $$ UpdateAbout how to solve the ODE, differentiate both equations by $s$, one get $$ begincases y - s y' b x' &= 0 y'^2 x'^2 &= 1 endcases quadstackrelfracddsLongrightarrowquad begincases -sy'' bx'' &= 0 y'y'' x'x'' &= 0 endcases $$ Comparing coefficients for $x''$ and $y''$, we find there is a function $lambda(s)$ such that $$ (x',y') = ( blambda, -slambda ) $$Since we want $x' > 0$, the normalization condition $x'^2 y'^2 = 1$ fixes $lambda$ to $frac1sqrts^2b^2$. Integrate above equation by $s$ will give us the desired solution.4. Helpful Spring Cleaning & DIY Car Detailing Tips | Fredonia Chrysler Dodge Jeep RamWinter is finally taking its final breaths, and with it comes warmer and more enjoyable weather. But just because winter's wrath is weakening does not mean your car is out of the woods. Here are some useful spring cleaning tricks and DIY car detailing tips you can use to ensure your vehicle is prepared for the higher temps and longer road trips you are bound to take. Road salt is no joke-it can lead to car rust and all sorts of disgusting automotive ailments. As winter ends, you should ensure you are giving your car a full-on wash. Start by moving your car into the shade. Using a high-pressure hose or pressure washer, blast off the chemicals from the undercarriage and wheel wells. Do it again, just as a precaution. Take to the paint with a rinse and a few swipes from a soft sponge or microfiber cloth. Use a non-abrasive car-wash soap and wash one side at a time so that you can rinse the soap off before moving onto the next. Repeat if needed with clean water, and do not forget the wheels. Most mats are made of a special carpeting material-resilient, yes, but they are not typically stain-proof-and will require a thorough wash-n-scrub session. First, remove your mats and pick or vacuum up any loose debris like rock salt or wrinkled-up straw wrappers from your car's floor. Next, dilute stains with cold water, blotting with a rag. You can make a solution of water and dishwashing solution, but for the best results, use a specialty spot cleaner and follow the manufacturer's instructions. Here are some other handy cleaning tricks to help remove different types of stains: You can use small amounts of paint thinner-do perform a test spot first-to remove grease spots. Saturate the stain and cover with iodized salt. Let this mixture sit for a few minutes or until the grease looks to have been absorbed by the salt, then vacuum. If your pen exploded and left a large stain on our floor sometime during the winter, grab a can of hairspray and blast the stain. Once dry, wipe or brush the stain away, repeating the process until the ink is out. We wo not question why there's blood on your carpets. Instead, just use a laundry stain pen and ice-cold water. Dry laundering starch and water works well, too. If you are like most of us car owners, you've no doubt spilled a mocha latte or two on your way to work. To reduce the visibility of those pesky stains, apply cold water and glass cleaner, then blot. Carsickness can get the best of anyone. To remove the sights (and smells) of such a disaster, wash the area with mild soap detergent, warm water, and some club soda. Cover the saturated area with baking soda for additional odor absorbency. Lay your car mats out. Grab a brush and create a solution of hot water, dish soap, and white vinegar. Scrub the mats and allow to dry. Repeat if needed. For your car floors, you can use a steam cleaner to lift and treat most stains, or the same solution and process as mentioned above, taking care not to use too much water. Finally, apply standard shoe wax/polish to your mats to give them that new-car glisten. The harsh winter conditions and temperatures can do a doozy to your wipers. Allow the techs at our Fredonia CDJR service center to install your wipers, or check online to ensure sure you are investing in a quality set that fits your vehicle's make and model. A clean car is one thing, but why not have a clean and reliable car? To ensure your vehicle is ready to pile on some warmer-month mileage, bring it into our Fredonia service department. Our specialists will gladly change your oil and fluids, rotate and align your tires and wheels, and perform recommended maintenance. Call us at (877) 469-9970 or visit our new and used car dealership at 10294 Route 60 in Fredonia today! Serving all of Fredonia, NY, including the areas of Buffalo and Dunkirk, our new CDJR dealership and service shop is ready to make your spring, summer, and fall better than the last.
Help! Aquarium with Sand and Hang on Filter?
Help! Aquarium with Sand and Hang on Filter?
I have 2 tanks with sand and both have HOB filters. The intake is about 2 inches above the sand and I've not had any problems. I do, however, turn them off for an hour or 2 after I stir the sand.1. Priming side skirts on car with spray can primer?that's ok just make sure you wet sand the 1st 2 coats when dried & dry sand the 3rd coat then put your 4th coat of primer. when dried put at least 3 thin coats of enamel paint while overlapping while you are spray painting. i had to do my hood & when i was finished you would not know the difference between a professional paint job or a do it yourself paint job. hope this helps.2. how can I change the sand in my haywood sand filter?Turn off the pump. Take the top off the filter being careful not to pull the center pipe out. Use a shop vac to suck out the sand but do not push hard on the sand bed. About 1/2 way down go slowly as you will find "laterals" buried in the sand bed. Once you get to the laterals suck the sand out from between them and brush the sand off them. You do not have to get all the sand out but do not leave chunks either. To fill it Add enough water to cover the laterals inside by two inches of water. Pour the sand in slowly so that it settles around the laterals instead of pushing down on them. Once the sand is covering the laterals you can pour the rest of it in less carefully. Brush off the sand from the connections and wash them with water. Replace the top, turn the valve to backwash, turn on the pump, open the bleeder valve to let air escape, backwash/rinse as normal and you are done. You may have a little residual sand being expelled back into the pool but this is normal and will stop. If it continues then you may have cracked one of the laterals inside the sand bed.3. Best Way To Add Plants To Sand Substrate and is there such a thing of adding too many at one time 0?Do you have fluorescent easy for you 5 gallon? usual incandescent easy will now enable flora to strengthen. they will finally die. in case you have the easy and desire to apply flora, then merely purchase low easy stem flora. they do no longer want particular substrate-merely gravel will artwork. If nutrition gets caught, you may constantly use a small gravel vacuum purifier to suck out the junk. Sand would artwork, yet use an exceedingly skinny layer. on your 5 gallon, i might recommend below an inch. the priority with sand is that it will no longer carry your flora. Oh, and you would be able to't vacuum with a gravel vacuum because of fact the sand gets sucked up4. What is a giant crab thing that looks like sand fleas, sand moles, and sand crabs?very confusing subject. try searching on to a search engine. that could actually help!5. what is sand made of?Sand can be made of anything. The word sand is only as description of grain size and not mineralogy. Sand size classification is (smallest to largest)- Very fine sand->62um to 125um fine sand- >125um to 250um medium sand- >250um to 500um course sand- >500um 1mm very course sand >1mm to 2mm You will notice that moving down the size classification (largest to smallest) each size is half the size above it.6. do u think it's possible for a person to blush so hard, that their blood will come out thru their pores?I guesssss. Never see it, though. I read a book of "most embarrising moments" that people submitted to the author. Here were the top two; 1. A lady wrote that she was a motivational speaker, talking to a big crowd in a convention hall. Suddenly, she got sick. So she excused herself from the stage, went behind the screen, down the hall to the bathroom, closed the door to the toilet; and went on for about 10 minutes making various loud groaning noises, digestive and stomach gas noises, etc. Then there was a knock at her stall door. A lady said "excuse me, but you still have your microphone on!" Wow! That was a bad moment. 2. A lady on vacation in the bahamas was walking back from the beach to the hotel. Sand was in her bikini bottom rubbing her skin every step she took. So she ran inside some huge hedges against the building and took her bottom suit off, shook out the sand, wiped all the sand off of her skin (even the tight places), put the suit back on, and walked back into the hotel. The man at the reception counter, pointing to the tinted window along the wall - BEHIND THE BUSHES - said to her; "did you get all the sand out from between your legs?" The lobby was filled with about 30 people who were ALL watching her while she was inside the hedges. She thought the window glass behind her was not see-thru. It was tinted and dark, but definitely see-thru. Longest walk back to any room.
LiTTT Snaps LED Strips Together Without Solder
LiTTT Snaps LED Strips Together Without Solder
Programmable RGB and RGBW LEDs, especially in strip form, have revolutionized the kind of lighting effects that creators can easily make. Working with strips, however, normally means breaking out the soldering iron. If for some reason you need to make changes, you then have to repeat the process over again — hopefully without damaging anything.If you’d prefer for things to be more plug-and-play, the LiTT Snap! system, by Daniel Tooker, features electrical connectors that — you guessed it — simply snap together. They form connections by bending the strip inside of a square piece of RPVC extrusion, or into an equivalent 3D-printed shape. The system is now available on Kickstarter, featuring 90 and 45 degree connectors, extrusion, and the RGBW LEDs themselves, along with the pigtails needed to connect everything to power and your favorite dev board.It’s an interesting concept, but the stretch goals expand things even further, including a 135- and 180-degree connector, as well as mounting hardware, and even a rotating corner connector. As an added bonus, if successful, this campaign will help in the development of the LiTTT HUB. The aim of the hub is to be a connected lighting controller “to rule them all,” further simplifying what you can do with these amazing strips!.·RELATED QUESTIONWere can I get quality outdoor LED lighting for my landscape project?If short maintenance, eco friendly landscape lighting is a precedence for you, outdoor LED lighting is a ideal option for your landscape lighting design. LED landscape lighting offers the protection, security and artistic qualities as any other landscape lighting solution, but it also offers a concentrated ecological footprint and lower maintenance.You can emphasize the beautiful architecture of your home’s external or landscaping with tactically placed outdoor lighting by LV Lightings. While your options may seem endless, it’s significant to believe the role you want your outdoor lights to play. Will they be for security reasons, or for more ornamental purposes?Outdoor LED lightingmay be more luxurious up front than other options, but in the long run it will go easier on your wallet than other bulbs. From LV Lighting’s LED lights have a long life span and offer excellence lighting that is power efficient.Whatever options you settle on, you’re sure to find a extensive selection of charming and well-designed landscape lighting right here on LV Lightings.
sin datos
Contact Us
Contact Person: AI customer service
Tel: +86 0757-23368757
Address: No.119, Shuiyin Road, Yuexiu District, Guangzhou 
WHATSAPP: 13885223350
Better Touch Better Business
Contact Sales at JuJiao.
Call Us
+86 0757-23368757
Copyright © 2021 FOSHAN SAN DUN Furniture CO., LTD. | All Rights Reserved |Sitemap